Hi. You have not informed the subject to which this question refers, which makes it impossible for your question to be answered. However, I will try to help you as best I can.
The only way to answer this question is to evaluate the media where the subject in question is being presented. Thus, you must understand this subject, whether reading a text about it or watching a video about it, the important thing is that you understand it and absorb all the teachings it is capable of transmitting.
In this case, you need to evaluate all these teachings which was the most important for you and which represented a very important lesson in your life. This lesson will be the biggest takeaway you've achieved with this subject.
Answer:
The answer is below
Explanation:
The amount of power dissipated by a processor is given by the formula:
P = fCV²
Where f = clock rate, C = capacitance and V = Voltage
For the old version of processor with a clock rate of f, capacitance C and voltage of V, the power dissipated is:
P(old) = fCV²
For the new version of processor with a clock rate of 20% increase = (100% + 20%)f = 1.2f, capacitance is the same = C and voltage of 20% increase = 1.2V, the power dissipated is:
P(new) = 1.2f × C × (1.2V)² = 1.2f × C × 1.44V² =1.728fCV² = 1.728 × Power dissipated by old processor
Hence, the new processor is 1.728 times (72.8% more) the power of the old processor
In software: Logical Volume. In hardware it's usually called RAID (Redundant Array of Inexpensive Devices).
Because there is a very likely chance you can get electrocuted which could lead to medical treatment or even death. Also if working near trees or polls or anything that is touching a power line may lead to you being electrocuted.
Answer:
c. Type 1 hypervisor installed directly on server hardware.
Explanation:
The customer plans to replace the old network services to ensure that the operation and service of the company is fast and up-to-date. The old servers will slow down the activities of the company and can also affect the overall company's output. The best option is to use and type 1 hypervisor and it should be installed on the server hardware directly.
