Answer:
The configuration of the R1 is as follows
Explanation:
Router>enable
Router#show running-config
Router#show startup-config
Router#configure terminal
Router(config)#hostname R1
R1(config)#line console 0
R1(config-line)#password letmein
R1(config-line)#login
R1(config-line)#exit
R1(config)#enable password cisco
R1(config)#enable secret itsasecret
R1(config)#service password-encryption
R1(config)#banner motd #Unauthorized access is strictly prohibited#
R1(config)#end
R1#exit
R1>enable
R1#copy running-config startup-config
R1#show flash
R1#copy startup-config flash
Answer:
D. a claim that more people drink a certain brand of cola that others
Explanation:
Basta yan yung sagot ko
Answer:
Option A:
<input name="name" id="id" type="number" value="value" step="value" min="value" max="value" />
Explanation:
Spinner control is a graphical control element where user can adjust the value by pressing up or down arrow button. An example is given in the attached image.
In HTML, one of the key attributes we must use to create a spinner control is "step". The attribute "step" is required to specify the interval of the step value when user press the up or down arrow button.
If we set the attribute values as follows:
- type = "number"
- value = 2
- min = 0
- max = 10
The setting above will give a spinner control with a range of legal numbers between 0, 2, 4, 6, 8 and 10.
Answer:
You should disable termination on the Small Computer System Interface (SCSI) controller card.
Explanation:
SCSI is an acronym for Small Computer System Interface, which is also generally referred to as host bus adapter (HBA). The SCSI is typically a chip that controls the communication between the operating system (OS), storage devices such as hard disk drives and the host computer system. Also, it helps with the interpretation of the electrical signals between the Small Computer System Interface (SCSI) bus and the input-output bus for storage devices.
In this scenario, you want to upgrade a server by installing an external SCSI tape drive. The system currently has a Small Computer System Interface (SCSI) card and an internal SCSI hard drive. At bootup, the system fails to recognize the new tape drive. To solve this problem, you should disable termination on the SCSI controller card so that only the external SCSI tape drive will be active and the SCSI won't be detected.
A software developer would utilize an architectural design to detail a compilation of hardware and software components to create a framework for software development.
The term architectural design denotes the oftware architecture while the term non-architectural design denotes the detailed design. The architect draws the line between these two designs.