Answer:
132 N
Explanation:
Given that a 1.1 kg hammer strikes a nail. Before the impact, the hammer is moving at 4.5 m/s; after the impact it is moving at 1.5 m/s in the opposite direction. If the hammer is in contact with the nail for 0.025 s, what is the magnitude of the average force exerted by the hammer on the nail
From Newton 2nd law of motion,
Change in momentum = impulse.
Change in momentum = m( V - U )
Substitute all the parameters into the formula
Change in momentum = 1.1 ( 4.5 - 1.5 )
Change in momentum = 1.1 × 3
Change in momentum = 3.3 kgm/s
Impulse = Ft
That is,
Ft = 3.3
Substitute time t into the formula above
F × 0.025 = 3.3
F = 3.3 / 0.025
F = 132 N
Therefore, the magnitude of the average force exerted by the hammer on the nail is 132 N.
Answer:
The temperature of the coil will increase (over heating will occur)
Explanation:
This overheating generally occurs when the motor is overloaded, when a bearing seizes up, when something locks the motor shaft and prevents it from turning, or when the motor simply fails to start properly.
Back emf is zero when the motor is not turning, and it increases proportionally to the motor's angular velocity. As the motor turns faster and faster, the back emf grows, always opposing the driving emf, and reduces the voltage across the coil and the amount of current it draws.
Answer:
Light bulbs are rated in watts to indicate how much energy they consume. Does the wattage of a light bulb have anything to do with brightness? ... In general, that works well with traditional incandescent light bulbs. ... It's also worth noting that kW can be synonymous with “demand” if you're talking to a utility ...
Explanation:
Light bulbs are rated in watts to indicate how much energy they consume. Does the wattage of a light bulb have anything to do with brightness? ... In general, that works well with traditional incandescent light bulbs. ... It's also worth noting that kW can be synonymous with “demand” if you're talking to a utility ...
The formula for potential energy would be PE = mgh
Where: m is the mass; g is the acceleration due to gravity, and h would be height.
So plugging in the data:
PE = 150kg × 9.8 m/s^2 × 10m
= 14700 Joules would be the potential energy for this problem.
<span>
</span>
