Force:newtons
distance:meters
work:joules
power:either watts or horsepower
energy:joules
time:kiloseconds and milliseconds
Answer:
A. True
Explanation:
Be sure your processor is receiving sufficient cooling by verifying if there is a heatsink on it. If there is, make sure that it's inserted fully into cpu_fan port on the motherboard. If the boot process still turns off, you may have a defective processor or replace the motherboard.
Answer:
network 10.10.8.0 0.0.3.255 area 0
this will include all the interfaces on a device whose IP addresses only begin with a 10.10.8, 10.10.9, 10.10.10, or 10.10.11.
Explanation:
<em>show ip ospf interface
</em>
<em>show ip ospf interface brief</em>
these commands are used to display the interfaces that have been enabled into local ospf . it also shows explanation about them by brief command mentioned above.
<em />
Answer:
To first create the header you will user the <h1></h1> tag
Then you will use css to align it to the center h1 {text-align: center;}
Explanation:
Answer:
the answer is "D". Park
Explanation:
Automatic transmission fluid is a oil use in vehicles to keep the gears working normal.
Checking the Automatic transmission fluid (ATF) with the engine running is necessary to warm up the fluid so that the original level of the fluid is picked correctly when using a dipstick or a rod, hence the reason for normal operating temperatures.
Virtually, nobody can check a vehicle at motion because a vehicle only move at First, second, third, to fifth gear. the temperature of a moving vehicle increases as the engine works. A normal temperature is needed to check the ATF, and the best time recommended is before moving the vehicle (immediately after starting the engine).
Therefore, the best gear position recommended for checking automatic transmission fluid is at PARK.
