Answer:
still need help with this or you got it done if not lmak asap and I can help ya:)
Answer:
The port that should be set open to allow users to access this new server is:
TCP port.
Explanation:
Ports are openings or entrance doors through which data packages have access to a PC or server. TCP and UDP are transport protocols with port numbers. TCP means Transmission Control Protocol. They are used to connect two devices over the internet and other networks. UDP means User Datagram Protocol. They are used to connect applications and to speed the transfer of data. Comparatively, UDP is faster, simpler, and more efficient than TCP. TCP enables retransmission of lost data packets, which UDP cannot do.
Answer:
128 GB
Explanation:
Here, we are interested in calculating the total capacity of the disk.
From the question, we can identify the following;
Number of surfaces = 4
Tracks per surface = 131,072
Number of sectors = 2,048
Each Block size = 512 bytes
Mathematically;
Total data capacity of the disk = no of tracks * no of sectors * block size
= 131,072 * 2048 * 512 bytes
= 2^17 * 2^11 * 2^9 bytes = 2^37 bytes
1 GB = 2^30 bytes
So 2^37 = 2^7 * 2^30
= 128 GB
Answer:
What sources? WILL ANSWER in comments
Answer / Explanation:
195.200.0.0/16
Note: Class C address can not be assigned a subnet mask of /16 because class c address has 24 bits assigned for network part.
2ⁿ = number of subnets
where n is additional bits borrowed from the host portion.
2ˣ - 2 = number of hosts
where x represent bits for the host portion.
Assuming we have 195.200.0.0/25
In the last octet, we have one bit for the network
number of subnets = 2¹ =2 network addresses
number of host = 2⁷ - 2= 126 network addresses per subnets