Volume required for neutralization V will be:
V * 0.2125 M HCl = 25 mL * 0.17 M
V = 20 ml
First part:
When 10 mL is added we can apply Henderson equation to get the result, so:
The pH will be of basic buffer
pOH = pKb + log(salt/base)
or pOH = 4.19 + log (0.2125*10 / 25*0.17 - 10*0.2125 )
pOH = 4.19 and pH = 14 - 4.19 = 9.81
Second part:
When 20 ml is added, there is only salt formed
The pH will be salt of strong acid and weak base
So pH = 7 - 0.5 pKb - 0.5 log C
where C is the concentration of the salt formed so:
pH = 7 - (0.5*4.19) - (0.5 log (25*0.17) / (25+20))
= 5.42
Third part:
When 30 ml of the acid has been added,
The pH will be of the remaining strong acid
pH = - log (0.2125*10 / 25 + 30 )
= 1.326
Answer:
The equivalent circuit for the electrode while the electrolyte gel is fresh
From the uploaded diagram the part A is the electrolyte, the part part B is the electrolyte gel when is fresh and the part C is the surface of the skin
Now as the electrolyte gel start to dry out the resistance
of the gel begins to increase and this starts to limit the flow of current . Now when the gel is then completely dried out the resistance of the gel
then increases to infinity and this in turn cut off flow of current.
The diagram illustrating this is shown on the second uploaded image
Explanation:
Answer:
aplha particle is the answer
Answer:
Sodium chloride, I think
Explanation:
Salt's compound name is sodium chloride
what is the question asking?
How old are the siblings?
This answer can have different possibilities.
15 and 15=30
25 and 5=30
17 and 13=30
etc