Answer:
See the components in explaination
Explanation:
In order to make it as IPv6, few key components should be supported, those components are given below:
The infrastructure must support the enhanced protocol StateLess Address Auto-Configuration (SLAAC).
Static addressing with DHCPv6, dynamic addressing with DHCPv6 and SLAAC are the methods used to configure the IPv6. The network administrator should able to understand and implement the IPv6 through the DHCPv6.
Other than the implementation, working of IPv4 and IPv6 are same. Therefore, the administrator need not to learn new information for its working.
As the IPv6 address length is 128-bit and purpose is for everything on line to have an IP address. It must allow the internet to expand faster devices to get internet access quickly.
The DHCPv6 is not supported by all windows. Therefore, network administrator should check the corresponding Operating system (OS) would support the DHCPv6 for IPv6.
The network administrator must have good knowledge and skills on the IPv6.
The above mentioned key components should be verified by the network administrator in order to support for IPv6 project with DHCPv6.
Any end tag in HTML needs to look like this, the word body used in this example is one of the more important elements, but you can replace it to any real element in HTML:
i.e. </body>
The stick exerts a force on the puck; the puck exerts a force on the stick.
