Answer:
The phenomenon of total internal reflection of light is used in many optical instruments like telescopes, microscopes, binoculars, spectroscopes, periscopes etc. The brilliance of a diamond is due to total internal reflection. Optical fibre works on the principle of total internal reflection.
Explanation:
thank me later but if it wrong. sorry
Answer: 83.17
Explanation:
By definition, the dB is an adimensional unit, used to simplify calculations when numbers are either too big or too small, specially in telecommunications.
It applies specifically to power, and it is defined as follows:
P (dB) = 10 log₁₀ P₁ / P₂
Usually P₂ is a reference, for instance, if P₂ = 1 mW, dB is called as dBm (dB referred to 1 mW), but it is always adimensional.
In our question, we know that we have a numerical ratio, that is expressed in dB as 19.2 dB.
Applying the dB definition, we can write the following:
10 log₁₀ X = 19.2 ⇒ log₁₀ X = 19.2 / 10 = 1.92
Solving the logarithmic equation, we can compute X as follows:
X = 10^1.92 = 83.17
X = 83.17
Answer:
B. assistant director
Explanation:
Filmmaking can be defined as the art or process of directing and producing a movie for viewing in cinemas or television. The process of making a movie comprises of five (5) distinct phases and these are;
1. Development.
2. Pre-production.
3. Production.
4. Post-production.
5. Distribution.
An assistant director can be defined as an individual who is primarily saddled with the responsibility of reviewing and making script-breakdown, making daily call sheets of the crew, arranging logistics, and tracking the film production schedule. Also, an assistant director normally functions in the pre-production process of a movie and are expected to work closely with the director and other crew members, so as to understand their requirements or needs.
Hence, an assistant director is a specific job that usually includes the important pre-production step of making the script breakdown.
If a router tried to match a packet sourced from IP address 1.1.1.1 using this ACL, the first statement will be used.
a. First
<u>Explanation:</u>
We use ACL technology to make basic security level in the network. ACL is strictly used to update the routing in the network and make sure network pears and make sure the flow control for network traffic is followed.
Since it is routing ip address through ACL statement. It all depends on how the network engineer routed the traffic in the network. A packet with source IP address 1.1.1.1 would match any of the three explicitly configured commands described in the question. As a result, the first statement will be used.
The router searches the ACL statement by order and when the match is found it stops execution of the ACL statement that will match with the first occurrence.
<span>Encapsulation is defined as the process of adding a header in front of data supplied by a higher layer (and possibly adding a trailer as well).</span>
