Answer:
c. traffic shaping
Explanation:
A traffic shaping system is one that allows to adapt the incoming data traffic that comes from some node of the network giving it a special treatment called conformation of accepted traffic and thus allowing the frames to be forwarded through the network of data under traffic rules without having gone through some traffic shaping method, this can be detected as non-conforming traffic at the edge of access to the discarded metropolitan network.
Traffic shaping is a mechanism that alters the traffic characteristics of the cell flow of a connection to achieve better network efficiency while maintaining QoS objectives or in order to ensure that the cell flow conforms to traffic parameters according to the leaky bucket algorithm configuration of the traffic contract. Traffic shaping can be used in ATM, for example, to reduce peak speed, limit the length of the burst by means of adequate spacing of cells over time. The use and location of this function is network specific.
Yes, mobile devices have to work in limited screen space.
Answer:
In a series connection, the current is the same through each component regardless of any kind of components are used or their values. The voltage drops across each component in the circuit are dependent upon the values of the components used in the circuit. Another way to view a series connection is that the positive end of each component is connected to the negative end of the previous component in a 'one after the other' arrangement. The negative end of each component is also connected to the positive end of the next component.
It is one of which every component is arranged in a series connection. Hence series circuit will have same current at all points of the circuit. The voltage drop across each component in the circuit adds up to sum of voltage source across each component and of an equivalent component value. Breaking of the series circuit will make entire circuit to stop working. Suppose consider the three bulbs are connected in series connection and if even one bulb burns out or broken then all the three bulbs will stop working as well. In series circuit components like current (I) is sum of all the element and Voltage is sum of all the voltage drops and resistance is the sum of individual resistances.
Explanation:
Answer:
ila bgfffsg hqhffa hhfw ygga gha yqvvty1uh' fttyavt h5tfauv gtta76rq
