<span>Step 1Determine what type of connection you need for your computer and printer. If you see a large rectangular connection on your printer it is a parallel printer, and you will need to make sure you have a parallel port on your computer. This connection will be long and rectangular, and it may be red in color. If your Canon printer has a small square connection on the back it is a USB printer, and you will need to look for a flat slot on your computer to hook it up.Step 2Connect the printer and computer. If you are working with a parallel printer connect the large end of the cable to the back of the printer and the smaller end to the computer. If you have a USB printer, connect the square end of the cable to the back of the printer and the flat end to a free USB port on your computer.Step 3Turn on your printer and the computer. Insert the print cartridges that come with the printer. Watch the lower right-hand corner of your computer screen for a "found new hardware" message. This is your indication that the operating system has found your new printer and is installing the proper driver for it.Step 4Insert the CD that comes with your printer, if you are prompted to do so. If your operating system was unable to find a suitable driver it will prompt you for the CD. Keep your CD handy anyway, because you will need it to install the printer utilities.Step 5Insert the CD and allow it to install your printer utilities. After the utilities are installed you will be prompted to clean and align the print heads on your new printer. After the print heads have been aligned your new Canon printer will be ready for use.hope this helps</span>
Answer:
scheduling
Explanation:
Scheduling- it is referred to as assigning a task to complete the goal or work on time. he works can include data flow, processing of data, etc.
There are two main types of scheduling
1) Preemptive process
2) Non- preemptive process
Preemptive process - in this process, priority is given to important tasks rather than less important tasks. the current task can be held for an important task
Non-preemptive process - It is referred to that process when the predefined schedule follows. In this process, next task executed only when current task finish
Answer:
1. Create Charts or Graphs
2. Storing Financial Data
3. Analyzing data to draw conclusions
Explanation:
Network technologies specialist Hannah would need to configure: C. RIP version 2 using Internet Protocol Version 4 (TCP/IPv4).
<h3>What is RIP?</h3>
RIP is an acronym for Routing Information Protocol and it can be defined as an intradomain routing protocol which is typically designed and developed based on distance vector routing.
<h3>The types of
RIP.</h3>
In Computer networking, there are two main types of Routing Information Protocol (RIP) and these include:
RIP version 2 are generally designed and developed to include subnet masks unlike RIP version 1. Thus, Hannah would need to configure RIP version 2 using Internet Protocol Version 4 (TCP/IPv4) allow several machines on different subnets to communicate with each other using broadcasts.
Read more on routing protocol here: brainly.com/question/24812743
C, building design. Its the only visual one, the rest have to do with speaking/listening.
