Answer:
a. A only
Explanation:
When air, is in excess of allowable amounts, it can cause the system to operate at pressures that are higher than normal. This means that the recycled refrigerant is operating at high pressure. Thus Technician A is correct.
However, Technician B is incorrect because unlike reclaimed refrigerants where the process strip the refrigerant of impurities making it to meet the standards of a new refrigerant, the recycled refrigerant is not as pure as it's contaminants are only reduced.
Therefore, only technician A is correct.
Don’t know what the answer is but do you, I have the test for that today
Answer:
Check the explanation
Explanation:
A packet filter firewall is used as a check point between internal corporate network to the outside internet. It blocks all the inbound traffic from the outside hosts trying to initiate a direct TCP connection to the internal corporate webserver. The network design with firewall is shown in the attached image below:
The figures in the attached image below shows an internal corporate network is protected with a packet filter firewall to minimize the inbound traffic from the external network or an internet. Therefore, the packet filter is used as a check point between the network.
The packet filter blocks all attempts by the outside hosts in order to initiate a direct TCP connection to the internal webserver of the internal corporate network.
Going by the second part of the attached image below can can therefore conclude that:
• Rule 1 specifies that, deny any packet with the destination address 5.6.7.8 if the STN flag of TCP header is set.
• Rule 2 specifies that, allow the inbound email traffic from the external source.
• Rule 3 specifies, allows the Outbound TCP traffic from the internal corporate network.
• Rule 4 specifies, allows outbound Email traffic from the internal corporate network to the external network.
• Rule 5 specifies, block any traffic from any source to the any destination.
<u>Answer:</u>
<em>using System;
</em>
<em>public class Program
</em>
<em>{
</em>
<em> public static void Main()
</em>
<em> {
</em>
<em> String input ;
</em>
<em> while(true)
</em>
<em> {
</em>
<em> input = Console.ReadLine();
</em>
<em> if(input.Equals(""quit""))
</em>
<em> break;
</em>
<em> Reverse_String(input);
</em>
<em> }
</em>
<em> return;
</em>
<em> }
</em>
<em>static void Reverse_String(string input_text)
</em>
<em>{
</em>
<em> char[] text = input_text.ToCharArray();
</em>
<em> Array.Reverse(text);
</em>
<em> Console.WriteLine(text);
</em>
<em>}
</em>
<u>Explanation:</u>
<em>In the above program a separate function is written to reverse the string.</em>
This method takes the string as an argument and place it in a array and then use the built-in function reverse and print the reversed string in the console.
<em>In the main(), the input is obtained from the console and it is passed to the reversestring().
</em>