Those two units can be compared to a 'mile per hour' and a 'mile per hour - hour'.
One is a rate. The other is a quantity, after maintaining a rate for some time.
-- 'Joule' is a unit of energy. It's the amount of work (energy) you do
when you push with a force of 1 newton though a distance of 1 meter.
Lifting 10 pound of beans 3 feet off the floor takes about 40.7 joules of energy.
-- 'Watt' is a <u><em>rate</em></u> of using energy . . . 1 joule per second.
If you lift 10 pounds 3 feet off the floor in 1 second, your <em>power</em> is 40.7 watts.
-- 'Watt-second' is the amount of energy used in one second,
at the rate of 1 joule per second . . . 1 joule.
-- 'Watt-hour' is the amount of energy used in one hour,
at the rate of 1 joule per second . . . 3,600 joules.
-- 'Kilowatt' is a bigger <em>rate</em> of using energy . . . 1,000 joules per second.
-- 'Kilowatt - second' is the amount of energy used in one second,
at the rate of 1,000 joules per second . . . 1,000 joules .
-- 'Kilowatt - hour' is the amount of energy used in one hour,
at the rate of 1,000 joules per second . . . 3,600,000 joules .
Depending on where you live, 3,600,000 joules of energy bought
from the electric company costs something between 5¢ and 25¢.
Answer: Photoreceptor cell, Chemoreceptor, Thermoreceptor, Mechanoreceptor
Hope this helps(:
Explanation:
Answer:
The images output from your new color laser printer seem to be a little too blue. to fix this problem we need to calibrate the printer.
Explanation:
This can be done by opening the toolbox, clicking in the device setting folder their you get print quality page click on it. Under the print quality option click on the calibrate next to calibrate now. Then click OK unless when the 'your request has been sent to the device' appears on the screen. When the calibration ends again try printing. calibrating is useful for managing the proper alignment of the inkjet cartridge nozzle to the paper and each other, without proper calibration the print quality deteriorates.
Swimmer and Divers. The Potential energy is transferred into Kinetic energy, and allows the diver to submerge into the water. The Kinetic energy then allows the diver to submerge and dive into the water. Potential energy however, is needed to allow the diver to get back out of the water after diving to get up and go and dive again, and then the Kinetic energy is transferred back to Potential energy to repeat the process.
Hope :) -Emilie Xo this is right and it helps! Xo
<span>This problem is relatively simple, in order to solve this problem the only formula you need to know is the formula for friction, which is:
Ff = UsN
where Us is the coefficient of static friction and N is the normal force.
In order to get the crate moving you must first apply enough force to overcome the static friction:
Fapplied = Ff
Since Fapplied = 43 Newtons:
Fapplied = Ff = 43 = UsN
and it was given that Us = 0.11, so all you have to do is isolate N by dividing both sides by 0.11
43/0.11 = N = 390.9 which is approximately 391 or C. 3.9x10^2</span>
