Answer:
See explaination
Explanation:
Here are the steps taken to draw the diagram!
opcode0 and the opcode1 signals are inverted/not to determine the case whether it is 00, 01, 10, 11.
Then they are 'and'ed with the corresponding Zero/lt signal to confirm if the case is true, for eg. zero = 1 if opcode = 00 (beq).
Then all the cases are 'or'ed to get the Branch signal!
See attachment for the diagram
Answer:
A. Technicians A and B
Explanation:
When we're talking about generic scanners and about all OBD-II codes, in this case, both technician A and B is the correct answer. Because we can scan all OBD-II codes with a generic scan.
But the technician A just says generic tools must be able to read all generic OBD-II codes and technicians B just says generic scan tools must be able to read manufacture OBD-II code, both are correct.
Answer:
The first HDD was created by IBM in 1956 and was the size of a refrigerator. The total storage capacity was 5 MB and only two heads were used to read the disks. The 1970s offered a hard disk drive in much smaller shells with the ability to store roughly 60 MB.
Please Mark Brainliest If This Helped!
Answer:
Short-circuit evaluation is performed with the not operator.
