Answer:
providing real-time data feeds on millions of people with wearable devices
Explanation:
You have a raspberry pi connected to all the sensors and a code running to trigger if the sensors are triggered. Each sensor and keypad would run to a different input on the pi. They should al be able to be powered with a single cell lipo. Is that what you are asking?
1. The IP address
2. Subnet mask
3. Default gateway address
It’s values should be added to the NIC properties in order for the computer to have basic network connectivity. This can be done either statically or dynamically with DHCP. An additional value that should be present if the computer is to be used to connect to the Internet is the DNS server value. A computer automatically attempts to locate a DHCP server if configured to do so. A DHCP server address is not used. Finally, NAT is configured on a router, not on a computer host, and speed and duplex settings are NIC hardware settings and not IPv4 properties of the NIC.
Answer:
algorithms for finding the area
Explanation:
you need algorithms to find out any computer input information.