Answer: c.) Yes, the process is in control.
Explanation:
For the process to be in control, the number of defects have to be between the Upper Control Limit and the Lower Control limits of the c-chart which can be used to measure defects of irregularities per unit.;
UCL = C-bar + z*√(c-bar)
LCL = C-bar - z*√(c-bar)
C - Bar =
C - Bar =
C - Bar = 4.375
z = 3 when using the 3 sigma control
UCL = C-bar + z*√(c-bar)
UCL = 4.375 + 3 * √(4.375)
UCL = 10.65
LCL = C-bar - z*√(c-bar)
LCL = 4.375 - 3 * √(4.375)
LCL = -1.9
LCL = 0 (Lower limit minimum should be 0 at least)
Defects are within the control limits. The process is in control.
Answer:
The price of corn increases, but the effect on the amount of equilibrium cannot be determined without further information.
Explanation:
Due to the increase in both the biofuel that is produced from corn and the costs of field production of corn oil, it is obvious that an increase in demand also increases corn grain.
However, in order to quantify the imbalance that was generated from these new demands and offers, more quantification information is needed, so it is obvious that an imbalance was generated but with the exposed data it cannot be quantified.
Answer:
the material handling cost per wall mirror is $500
Explanation:
The computation of the material handling cost per wall mirror is as follows;
= Budgeted material-handling costs ÷ material moves × moves ÷ number of wall mirrors
= $50,000 ÷ 20 × 5 ÷ 25
= $500
Hence, the material handling cost per wall mirror is $500
The same is to be considered
Answer:
true
Explanation:
businesses need products and services too