The nuclear equation :
₈₂²¹⁴Pb ⇒ ₈₃²¹⁴Bi + ₋₁⁰e
<h3>Further explanation
</h3>
Given
₈₂²¹⁴Pb
beta β ₋₁e⁰ particles
Required
Nuclear equation
Solution
Radioactivity is the process of unstable isotopes to stable isotopes by decay, by emitting certain particles,
-
alpha α particles ₂He⁴
- beta β ₋₁e⁰ particles
- gamma particles ₀γ⁰
- positron particles ₁e⁰
- neutron ₀n¹
The principle used is the sum of the atomic number and mass number before and after the decay reaction is the same
The reaction
₈₂²¹⁴Pb ⇒ X + ₋₁⁰e
The element X has
-the atomic number = 82 + 1 = 83
-the mass number = 214
In the periodic system, the element with atomic number 83=Bismuth
Answer:
Correct answer is: "Cold Water"
Explanation:
EDGE 2020
Answer:
14C6(1st one)
Explanation:
by balancing the reaction on the right and left,the right side miss 6 from number of proton and 14 from mass number....
I pick but I'm not sure about it though 1and3
The present work addresses the performance of polycaprolactone (PCL) coating on fluoride treated (MgF2) biodegradable ZK60 magnesium alloy (Mg) for biomedical application. MgF2 conversion layer was first produced by immersing Mg alloy substrate in hydrofluoric acid solution. The outer PCL coating was then prepared using dip coating technique. Morphology, elements profile, phase structure, roughness, mechanical properties, invitro corrosion, and biocompatibility of duplex MgF2/PCL coating were then characterized and compared to those of fluoride coated and uncoated Mg samples. The invivo degradation behavior and biocompatibility of duplex MgF2/PCL coating with respect to ZK60 Mg alloy were also studied using rabbit model for 2 weeks. SEM and TEM analysis showed that the duplex coating was uniform and comprised of porous PCL film (~3.3 μm) as upper layer with compact MgF2 (~2.2 μm) as inner layer. No significant change in microhardness was found on duplex coating compared with uncoated ZK60 Mg alloy. The duplex coating showed improved invitro corrosion resistance than single layered MgF2 or uncoated alloy samples. The duplex coating also resulted in better cell viability, cell adhesion, and cell proliferation compared to fluoride coated or uncoated alloy. Preliminary invivo studies indicated that duplex MgF2/PCL coating reduced the degradation rate of ZK60 Mg alloy and exhibited good biocompatibility. These results suggested that duplex MgF2/PCL coating on magnesium alloy might have great potential for orthopedic applications.