Explanation:
There are numerous videos and web sites that can show you the process of copying an angle. Some are animated. The best we can do here is show you a diagram with instructions. Of course, your curriculum materials already provide that.
__
1. Set the compass to a convenient radius. Use that to draw an arc through rays ED and EF, using point E as the center.
2. Without changing the compass setting, draw a similar arc using S as the center, making sure it crosses the line containing S and extends far enough to accommodate the following steps. (In the attached, we show a full circle, because the tool we used won't draw an arc with a specific radius.)
3. Mark the points where the arc crosses ED as G, and where it crosses EF as H. Mark the point where the arc crosses the line containing S as I.
4. Set the compass radius to the distance GH. Using I as the center draw an arc with that radius so that it crosses the one made in step 2. Call that intersection point J. (Again, we have shown a circle because of the limitations of the tool being used for our diagram.)
5. Draw ray SJ to complete the angle copy.
Answer:
"Make sure one of them is a match"
Step-by-step explanation:
It takes a little practice and above all to generate heat through friction. By raising the temperature of the woods, it is possible to reach the ignition temperature through friction.
Fires require good equipment and good technique. The majority of times it fails is due to a lack of technique and equipment. This can make learning difficult.
For wood selections, you generally want to comply with the following:
- Dry Tinder
- You should be able to press the wood. If you can't, then it is too difficult.
- Wood not very strong but not soft
- Not sap in the wood
Make the friction forming a 90 degree angle between them, like a cross. Keep one of the sticks supported on the floor vertically, and the other horizontally rubbing it against it at rapid speed, at intervals.
Under this wood put dry tinder that is able to ignite quickly once you generate the fire.
And for the Puzzle remember the orden of the words:
<h2>Make sure one of them is a match. </h2>
Use tree wood, rub and heat until ignition is generated.
Answer:
Option C
Step-by-step explanation:
2 pentagons and 5 rectangles are needed to build this pentagonal prism!
