Answer:
The speed of sound in this gas is 409.6 m/s.
Explanation:
The length of the column changes from 20 cm from resonance to resonance. Thus,
The length change from one resonance to resonance. so, there is 1 loop change. So,
ΔL = 1 loop = λ/2
ΔL = 20 cm (given)
Also, 1 cm = 0.01 m
So,
ΔL = 0.2 cm (given)
The wavelength is:
λ = ΔL×2
λ = 2x0.2 = 0.4 m
Given:
Frequency (ν) = 1024 Hz
<u>Velocity of the sound in the gas = ν×λ = 1024×0.4 m/s = 409.6 m/s</u>
Answer:
solved
Explanation:
a) F_net = (F2 - F3)i - F1 j
b) |Fnet| = sqrt( (F2 - F3)^2 + F1^2)
= sqrt( (9- 5)^2 + 1^2)
= 4.123 N
c) θ = tan^-1( (Fnet_y/Fnet_x)
= tan^-1( -1/(9-5) )
= -14.036°
Answer:
Lastly, the heat transfer rate depends on the material properties described by the coefficient of thermal conductivity. All four factors are included in a simple equation that was deduced from and is confirmed by experiments. The rate of conductive heat transfer through a slab of material, such as the one in Figure 3, is given by
Q
t
=
k
A
(
T
2
−
T
1
)
d
,
where
Q
t
is the rate of heat transfer in watts or kilocalories per second, k is the thermal conductivity of the material, A and d are its surface area and thickness, as shown in Figure 3, and (T2 − T1) is the temperature difference across the slab. Table 1 gives representative values of thermal conductivity.
Explanation:
This strategy was known as "Island hopping"
If a simple machine reduces the strength of a force, "<span>the distance over which the force is applied" must be increased in order to keep the work constant.
In short, Your Answer would be Option A
Hope this helps!</span>