Every dimensional model is composed of one ---------tableo Centralo Parallelo Verticalo Horizontal

Computers and Technology

1 answer:

gulaghasi [49]4 years ago

8 0

Answer: Central

Explanation: Dimensional model is the model that is created for the requirement of analysis of a particular business such as data warehouse. It is usually referred as the fact table as well. Dimensional model has one major table known as central table and multi-part tables connected with it.The combination of the smaller tables are known as the dimension tables also.

You might be interested in

What's the inputs and outputs in a kitchen?

SashulF [63]

I really don't know...

6 0

3 years ago

1. Build and test D-type Flip-Flop using a built-in SR flip-flop.

GaryK [48]

Answer:

The attached files contain the realization of a D flip-flop from an RS flip-flop. It also contains the truth tables for both kinds of flip-flops

Explanation:

An SR flip flop is like a light switch. Set turns it 'on' and reset turns it 'off'

A D type flip-flop is a clocked flip-flop which has two stable states. A D type flip-flop operates with a delay in input by one clock cycle.

D type flip-flops are easily constructed from an SR flip-flop by simply connecting an inverter between the S and the R inputs so that the input to the inverter is connected to the S input and the output of the inverter is connected to the R input.

8 0

3 years ago

Modern ssds use a technique called "____" to spread write operations around the storage medium, thus evening out the impact of d

masha68 [24]

The question above has multiple choices as below;

a. Wear aggregation.

b. Wear mitigation.

c. Wear prevention

d. Wear leveling

The answer is d) Wear leveling.

This technique by some SSD controllers to increase the memory’s lifetime is called wear leveling. The mechanism for this principle is simple: distribute the entries for all the blocks evenly so that they will wear out evenly. Flash controller typically manages wear leveling and uses a wear leveling algorithm to control which physical block to use.

7 0

3 years ago

What is the current through R1?

patriot [66]

I = V/R. So the answer is 9/200 = 0.045A = 45mA which is B

8 0

3 years ago

How do I send the face to the back? Seriously, I can't find out how...

makvit [3.9K]

Answer:

i think you can layer it :)

Explanation:

nice drawing btw!

8 0

3 years ago