The diameter of a cylinder is called the a.) stroke b.)bore c.) principal length d.) radius

1 point

11Alexandr11 [23.1K]

I think the orange thing on the gun but i dont know what principle it is but i think its c

Explanation:

Whem you press the orange thing it starts to work

5 0

3 years ago

A coil having resistance of 7 ohms and inductance of 31.8 mh is connected to 230v,50hz supply.calculate 1. The circuit current 2

lora16 [44]

(1) The current in the circuit is 18.87 A,

(2) The phase angle is 54.97°

(3) The power factor is 0.574

(4) The power consumed is 2491.2 W

(1) To calculate the current in the circuit, first, we need to find the overall impedance of the circuit.

We can calculate the overall impendence of the circuit using the formula below.

Z = √[R²+(2πfL)²]........................ Equation 1

Where:

R = resistance of the coil
f = Frequency
L = Inductance of the coil
Z = Overall impedance of the circuit

From the question,

Given:

R = 7 ohms
L = 31.8 mH = 0.0318 H
f = 50 Hz
π = 3.14

Substitute these values into equation 1

Z = √[7²+(2×3.14×50×0.0318)²]
Z = √(49+99.7)
Z = √(148.7)
Z = 12.19 ohms.

Therefore we use the formula below to calculate the current in the circuit.

I = V/Z.................. Equation 2

Where:

V = Voltage
I = current in the circuit.

Given:

V = 230 V.

Substitute into equation 2

I = 230/12.19
I = 18.87 A

(2) To calculate the phase angle, we use the formula below.

∅ = tan⁻¹(2πfL/R)............... Equation 3

Where:

∅ = Phase angle.

Substitute into equation 3

∅ = tan⁻¹(2×3.14×50×0.0318/7)
∅ = tan⁻¹(9.9852/7)
∅ = tan⁻¹(1.426)
∅ = 54.97°

(3) To calculate the power factor, we use the formula below.

pf = cos∅............ Equation 4

Where:

pf = power factor.

Substitute the value of ∅ into equation 4

pf = cos(54.97°)
pf = 0.574.

(4) And Finally to calculate the power consumed we use the formula below.

P = V×I×pf................ Equation 5

Where:

P = The power consumed

Substitute the values into equation 5

P = 230(18.87)(0.574)
P = 2491.22 W

Hence, (1) The current in the circuit is 18.87 A, (2) The phase angle is 54.97° (3) The power factor is 0.574 (4) The power consumed is 2491.2 W

Learn more about Impedance here: brainly.com/question/13134405

5 0

2 years ago

Consider an aircraft powered by a turbojet engine that has a pressure ratio of 9. The aircraft is stationary on the ground, held

77julia77 [94]

Answer:

The break force that must be applied to hold the plane stationary is 12597.4 N

Explanation:

p₁ = p₂, T₁ = T₂

$\dfrac{T_{2}}{T_{1}} = \left (\dfrac{P_{2}}{P_{1}} \right )^{\frac{K-1}{k} }$

${T_{2}}{} = T_{1} \times \left (\dfrac{P_{2}}{P_{1}} \right )^{\frac{K-1}{k} } = 280.15 \times \left (9 \right )^{\frac{1.333-1}{1.333} } = 485.03\ K$

The heat supplied = $\dot {m}_f$ × Heating value of jet fuel

The heat supplied = 0.5 kg/s × 42,700 kJ/kg = 21,350 kJ/s

The heat supplied = $\dot m$ · $c_p(T_3 - T_2)$

$\dot m$ = 20 kg/s

The heat supplied = 20* $c_p(T_3 - T_2)$ = 21,350 kJ/s

$c_p$ = 1.15 kJ/kg

T₃ = 21,350/(1.15*20) + 485.03 = 1413.3 K

p₂ = p₁ × p₂/p₁ = 95×9 = 855 kPa

p₃ = p₂ = 855 kPa

T₃ - T₄ = T₂ - T₁ = 485.03 - 280.15 = 204.88 K

T₄ = 1413.3 - 204.88 = 1208.42 K

$\dfrac{T_5}{T_4} = \dfrac{2}{1.333 + 1}$

T₅ = 1208.42*(2/2.333) = 1035.94 K

$C_j = \sqrt{\gamma \times R \times T_5}$ = √(1.333*287.3*1035.94) = 629.87 m/s

The total thrust = $\dot m$ × $C_j$ = 20*629.87 = 12597.4 N

Therefore;

The break force that must be applied to hold the plane stationary = 12597.4 N.

5 0

3 years ago

There are four main goals of an HVAC system. Name the goals and describe their purpose

nikitadnepr [17]

Answer:

The summary of the given question is summarized throughout the explanation segment below.

Explanation:

The goals of the HVAC system are as follows:

The greatest approach to enhance comfort in whatever commercial facility is simply to establish full management.
To encourage extremely effective centralized air conditioning operations they must be connected.
Comfort would be crucial for companies information about the moment of the year.
Every government is working regarding cost reduction, therefore commercial HVAC systems may enable you to achieve such goals.

Purpose of HVAC systems:

The atmosphere wherein it operates is controlled by someone with an HVAC system, the same maximum or minimum temperature of a space is controlled thru all the air conditioning.

8 0

3 years ago

Precast double-tee units are generally used as structural floors when:________.

TiliK225 [7]

Answer:

d. floor spans exceed that which is economical with site-cast or hollow-core slabs and exceed 60 feet.

Explanation:

Double tee slabs are prestressed concrete castings usually about 100 m to 150 m long. They are usually used in the construction industry in structures requiring a long floor span (or roof span) exceeding 60 feet in length, that is required to bear additional load (additional load carrying capability). Double tee slabs are usually employed in construction because they shorten construction time. reduce congestion at the construction site, and also reduce construction cost.

They are the required choice in construction when the cost of site casting or hollow-core slabs is no longer economical due to the length of the structure exceeding 60 feet.

8 0

3 years ago