Answer:
14.27 mm
Explanation:
Force = 80 Newton
Pressure exerted = 5 bar = 5×10⁵ Pa
Pressure exerted = Force/Area
Area = Force/Pressure
Area of the cylinder=πd²/4
Hence diameter of cylinder 14.27 mm
Explanation:
इसिसिसिसैस्स्स्स्स्स्स्स्स्स्सूस्सोस्स्स्स्स्स
Answer:
Test the working prototype
Explanation:
After the prototype is built, it is put through basic operational tests and purpose of applicability or performance test
The prototype is also laboratory tested to determine how reliable it is with tests performed to determine the modes of failure. Performance of tests are carried out by subjecting the prototype to stresses beyond its designed stress such as to discover failure modes
The system is however tested in isolation at this stage and the performance and risks of the prototype are quantified after the test, with improvement requirement outlined for modification of the design.
Answer:
Required Yellow time interval = 5.333 seconds
Explanation:
The solution and complete explanation for the above question and mentioned conditions is given below in the attached files. I hope my explanation will help you in understanding this particular question.
Keep outlets out of reach from Tub, ground fault circuit interrupter (GFCI) receptacles must be used