Answer:
File transfer protocol (FTP)
Explanation:
An information can be defined as an organized data which typically sent from a sender to a receiver. When a data is decoded or processed by its recipient it is known as information.
Generally, there are several channels or medium through which an information can be transmitted from the sender to a receiver and vice-versa. One of the widely used media is the internet, a global system of interconnected computer networks.
There's a standard framework for the transmission of informations on the internet, it is known as the internet protocol suite or Transmission Control Protocol and Internet Protocol (TCP/IP) model. One of the very basic rule of the TCP/IP protocol for the transmission of information is that, informations are subdivided or broken down at the transport later, into small chunks called packets rather than as a whole.
The three (3) main types of TCP/IP protocol are;
I. HTTP.
II. HTTPS.
III. FTP.
File transfer protocol (FTP) is used between two or more computers. One computer sends data to or receives data from another computer directly through the use of network port 20 and 21.
It grows but not drastically but you’ll be able to see the difference of length in a few months or even years depending on the person.
Answer:
Prolonged exposure to vibration
Long periods of localized pressure
Explanation:
Repetitive motion is certainly not harmful, but prolonged repetitive motion can be a cause for injury. This is because if you are in repetitive motion for a long time, you exert a lot of force on your body, and that is certainly going to effect your body. And after a certain limit, even death can be a case. Hence, one should be very concerned about the time limit while their body goes through the repetitive motion.
However, neutral position we are always safe, as it’s an ideal position, as in this position, the work done is zero. Work done= force x displacement. And displacement in neutral position is zero. Hence, zero energy is lost. Hence, we are safe in this position.
Hence the above answer.
Answer:
Create a default route on the border router. Check the NAT configuration and network addresses.
Explanation:
The LAN or local area network is a network meant for a small geographic area, ranging from a small home office to office building.
For a LAN to be connected to the internet, it is subscribed to a ISP. The ISP provides the internet/ global WAN resources to the LAN. The border router or stub is configured with a gateway of last resort or default route to route packets to the WAN network and a Network address translation, NAT, is used for a large LAN.
The syntax for default route configuration on the border router is;
Router(config)# IP route 0.0.0.0 0.0.0.0 s0/0/1