<span>Net View is the command issue from a command prompt to see a listing of the computers in your workgroup.It will display the list of domains,computers resources which have been shared by the specified computer then it will list all computers currently in our domain.The syntax for net view using command prompt NET VIEW
[\\computername [/CACHE] | [/ALL] | /DOMAIN[:domainname]].</span>
Answer:
The attached files contain the realization of a D flip-flop from an RS flip-flop. It also contains the truth tables for both kinds of flip-flops
Explanation:
An SR flip flop is like a light switch. Set turns it 'on' and reset turns it 'off'
A D type flip-flop is a clocked flip-flop which has two stable states. A D type flip-flop operates with a delay in input by one clock cycle.
D type flip-flops are easily constructed from an SR flip-flop by simply connecting an inverter between the S and the R inputs so that the input to the inverter is connected to the S input and the output of the inverter is connected to the R input.
Answer:
The answer is ".pcapng"
Explanation:
Wireshark format includes a "dump" with data packets, which is collected over a channel and sometimes a common folder to store, that data in the PCAP Next Iteration file system.
- The .pcapng stands for the file system, this file system compatible with the recorded data transmission packet. It includes several data blocks.
- It is quite robust, but it should not be helped by the other devices. Wireshark allows the libpcap system as well.
If you have purchased a printer that has the capability to print in duplex mode so that users can print on both sides of a sheet of paper. However, when users try to use this capability when they send a print job, documents are still printed on only one side. Then there might be a problem with (d) THE DUPLEX MODE NEEDS TO BE ENABLED ON THE DEVICE SETTINGS TAB IN THE PRINTER'S PROPERTIES.
Explanation:
- If the duplex mode isn't enable on the printer setting, then the printer is still going to read that the output should come in a single page and not in the duplex mode.
- When facing such a problem, the user should go to the "Device Settings" tab in the printer properties and change the required settings to print according to the users needs.
Answer:
The answer is D because u have the uppercase letter bold
