Solution:
initial = float(eval(input('Enter the monthly saving amount: ')))
x = (1 + 0.00417)
month_one = initial * x
month_two = (initial + month_one) * x
month_three = (initial + month_two) * x
month_four = (initial + month_three) * x
month_five = (initial + month_four) * x
month_six = (initial + month_five) * x
print('The sixth month value is: '+str(month_six))
Don't forget the saving amount, and initialize the balance with that amount. Inside the loop, work out and add the interest and then add the saving amount for the next month.
balance = 801
for month in range(6):
balance = balance * (1.00417)
print(balance)
Answer:
The motherboard must be configured to accept a particular type of memory.
Explanation:
The motherboard must be configured to accept a particular type of memory, especially when dealing with multi-channel memory. On motherboard, different modes can be configured to run simultaneously . For motherboard to take advantage of the triple memory channels on the board. You can also check the manual that came with the motherboard to know how to configure it.
Answer:
Both Technician A and Technician B is correct.
Explanation:
CAN (Controller Area Network) is specially designed for the European cars and the automotive industry, but it has become the popular bus in the industrial automation and also in other applications.
CAN is the serial communication bus that is designed for flexible and robust performance in a harsh environment.
Answer:
See attached file for complete detailed code.
Explanation:
See attached file.
Stack is LIFO data structure (Last In First Out) where the last element entered in stack will be the last one to be out of stack. It has three operations: push() : used to insert an element in stack, pop() : used to delete an element from the stack, top() : used to return the top of the stack i.e. the newest member of the stack. All these operations will take place at the top.
<u>Explanation:</u>
Now, looking at the program, x and y are initialized the values of 2 and 3 respectively. The stack pushes 8 onto the stack making it the first member of the stack. Then the value of x which is 2 is pushed onto the stack. Next, (x+5) = (2+5) = 7 is pushed onto the stack.
Pop() is used to delete hence 7 is popped out from the stack. top() is assigned to y which is 2 in this case and again 2 is popped out from the stack. Now, (x+y) = (2+2) = 4 is pushed onto the stack. And the top() is assigned to x which is 4. 4 is again popped out from the stack. Hence the value of x is 4.
