Convert the mixed number to inches. 3 feet 8 inches = 44 inches (12 inches per foot x 3 feet= 36 inches + 8 inches= 44 inches). 44 inches (length each section needs to be) x 4 (number of sections needed)=176 inches (total molding needed). To determine the amount of molding needed in feet, convert 176 inches into feet by dividing 176 inches by 12 inches. You get 14 2/3 feet, so the shortest board length is 15 feet.
Answer:
x=-1/2
Step-by-step explanation:
2x+2=4x+3
-1=2x
x=-1/2
Answer:
Step-by-step explanation:
The basic cost of the Snout is 45.99
15% of that amount = 45.99*15/100 = <u> 6.90</u>
Total Cost 52.89
You could figure out the total cost a slightly different way.
You could set up
Cost = snout (1 + 15%)
Cost = snout(1 + 15/100)
Cost = snout( 1 + 0.15)
Cost = 45.99(1.15)
Cost = 52.89
You can divide 87 by 3 which is 29, so each angle will be 29 degrees.
Since they are consecutive, that means they will all measure the same.
Hope this helps! :)
