Answer:
A = a + b / 2 x h
Step-by-step explanation:
Area is equal to side one plus side two divided by two then you multiply by the height of the trapezoid. Hope this helps!
Answer:
50cm or 500mm
Step-by-step explanation:
There are 4 base edges and 4 lateral edges, therefore, multiply the number for both edges by 4 and add.
Considering the fact that we were given two units of measurement, millimeters and centimeters, but we know that there are 10mm (millimeters) in a cm (centimeter) , we can just divide 55 by 10 to get 5.5.
¦
Therefore;
5.5 x 4 = 22
7 x 4 = 28
28 + 22 = 50cm
The diagram can be drawn in order to assist in answering the question.
Answer:
It is 
Step-by-step explanation:
the four is multiplied 5 times
Answer:
35%
Step-by-step explanation:
Answer:
0.00998 Inches
Step-by-step explanation:
Thickness of the light bulb filament = 0.01 Inch
Allowable error = 2%.
2% of 0.01 = 0.02 X 0.01 =0.0002 Inch
Therefore, the allowable thickness of the bulb filament

We can then calculate the least allowable thickness of the filament as:

The least allowable thickness of the filament is 0.00998 Inches.