Answer:
<u>Parametric design</u> involves engineers building up a 3D geometry piece by piece. 2D sketches turn into 3D features, with constraints and relations duly applied to fit the designer's intent.
Explanation:
Hope this helps
You have to use control + s only. but if you want to save it in different format, use control + shift + S
Answer:
Network Address Translation (NAT)
Explanation:
With the aid of Network address translation(NAT), the IP addresses of a particular local network are translated or mapped into a single or multiple global or public IP addresses. Therefore, a wireless router could use NAT to translate its private IP address on internal traffic (network) to a routable address for the internet.
With NAT, businesses can use many internal IP addresses since they are just for internal purposes and will be eventually converted into a single or a few multiple routable IP addresses.
Three types of NAT are possible:
(i) Static NAT : There is a one - to - one mapping between private IP addresses and routable (public) IP addresses. One private IP is mapped to one public IP address.
(ii) Dynamic NAT : There is a many- to - many mapping between private IP addresses and routable (public) IP addresses. Multiple private IPs are mapped to many public IP addresses.
(iii) Port Address Translation (PAT) : Many - to - one relationship between the private IP addresses and public addresses. Many private IP addresses can be mapped or translated into a single public IP address. This type of NAT is also called NAT overload.
Answer:
Time required is 0.007 s
Explanation:
As per the question:
Analog signal to digital bit stream conversion by Host A =64 kbps
Byte packets obtained by Host A = 56 bytes
Rate of transmission = 2 Mbps
Propagation delay = 10 ms = 0.01 s
Now,
Considering the packets' first bit, as its transmission is only after the generation of all the bits in the packet.
Time taken to generate and convert all the bits into digital signal is given by;
t = 
t = 
(Since, 1 byte = 8 bits)
t = 7 ms = 0.007 s
Time Required for transmission of the packet, t':
Answer:
Check the explanation
Explanation:
When it comes to database management systems, a query is whichever command that is used in the retrieval of data from a table. In a Structured Query Language (SQL), generally queries are more or less always made by using the SELECT statement.
I have been trying to type it here but it's not working
so kindly check the code in the attached image below
