Answer:
See the components in explaination
Explanation:
In order to make it as IPv6, few key components should be supported, those components are given below:
The infrastructure must support the enhanced protocol StateLess Address Auto-Configuration (SLAAC).
Static addressing with DHCPv6, dynamic addressing with DHCPv6 and SLAAC are the methods used to configure the IPv6. The network administrator should able to understand and implement the IPv6 through the DHCPv6.
Other than the implementation, working of IPv4 and IPv6 are same. Therefore, the administrator need not to learn new information for its working.
As the IPv6 address length is 128-bit and purpose is for everything on line to have an IP address. It must allow the internet to expand faster devices to get internet access quickly.
The DHCPv6 is not supported by all windows. Therefore, network administrator should check the corresponding Operating system (OS) would support the DHCPv6 for IPv6.
The network administrator must have good knowledge and skills on the IPv6.
The above mentioned key components should be verified by the network administrator in order to support for IPv6 project with DHCPv6.
Answer:
Switches break up collision domains and routers break up broadcast domains.
Explanation:
- Collision domain depicts the part within a network where a collision can happen.
- Collision occurs when two hosts transmit data packet at the same time within a network. Theses packets collide and the hosts have to resend the data after some time.
- Too many collisions can result in slow traffic speed and can effect network performance.
- So switches break up collision domains between the devices on a network and each port in a switch depicts a collision domain. This reduces the chance of packet collisions between the devices or hosts.
- When data is to be sent to a host, the switch keeps that data frame and waits for availability of the destination host before sending the data frame.
- Moreover full duplex switch mode there is not chance of collision as the transmitting path on one host is the receiving path on other host.
- Broadcast domain contains all the hosts that can reach each other at the Data Link layer via broadcast.
- Routers break up broadcast domains as routers contain separate broadcast domains for each interface.
- Routers do not forward broadcasts from one broadcast domain to other and drop the packet when they detect a broadcast address.
Answer:
i am still a beginner in this but i hope it helps.
- add scanner object;
- declare string FavColour;
- print msg to ask user for input
- print msg (" your favourite colour is " + FavColour)
Answer:
Explanation:
A ruler
;););););););););););););););)
