Answer:
6500 cm^3.
Step-by-step explanation:
That would be the volume of the large box - the volume of the cube
= 15*25*20 - 10^3
= 7500 - 1000
= 6500 cm^3.
Answer: If I’m not mistaken, the largest area is 75 m2 and the smallest is 2 m2
Step-by-step explanation:
For both : since they are asking for the area, you should calculate the perimeter.
So for the largest area, since you know that you have 40 fences, and each are 1 meter long, and they’re also asking for the largest rectangular area, this means that only the opposite sides will have the same length, so in order to divide the rectangle with the 40 one-meter fences, the biggest sides have to be 15 meters long (so for both : 15x2=30 meters). Then you deduct from 40, 30 : 40-30 = 10 which then you can devide by 2 and find 5 + 5 and that means that the 2 smallest sides will be 5 meters long each. Then finally to calculate the perimeter you should do the biggest side multiplied by the smallest side : 15 x 5 and you find 75 m2 (squaremeters), if I’m not mistaken.
And for the smallest area you take the smallest possibilities knowing that only the opposite sides should have the same length and not all of them, so you do 1 x 2 and you find 2 m2.
You can use the equation rise over Run you go up 4 and over 6 and you go down 2 and over 8 (im not sure if this helps)
Trapezoidal is involving averageing the heights
the 4 intervals are
[0,4] and [4,7.2] and [7.2,8.6] and [8.6,9]
the area of each trapezoid is (v(t1)+v(t2))/2 times width
for the first interval
the average between 0 and 0.4 is 0.2
the width is 4
4(0.2)=0.8
2nd
average between 0.4 and 1 is 0.7
width is 3.2
3.2 times 0.7=2.24
3rd
average betwen 1.0 and 1.5 is 1.25
width is 1.4
1.4 times 1.25=1.75
4th
average betwen 1.5 and 2 is 1.75
width is 0.4
0.4 times 1.74=0.7
add them all up
0.8+2.24+1.75+0.7=5.49
5.49
t=time
v(t)=speed
so the area under the curve is distance
covered 5.49 meters
Answer:
it sould be D because rise over run.
Step-by-step explanation:
at the point its 5/6 and the only answer with that fraction is D. or it depends because if you're looking for the begening of the dotted lines then it's C .but if you're looking for end point then it's D. if you don't know ask me and ill see what i can do