Answer:
Processing
Explanation:
The processor of a computer takes inputs runs them through the loaded programs and returns outputs usually to the screen or speakers of the computer.
The answer is c that what a lot of people use☻
Great Question! So the plug will go into the wall and electricity will hit the cord and power through the cord into the charger (Cordless) Now if you talking mobile phones such as iPhones. The battery powers wire and hardware to power your little mobile phone! Hope this helps.
Answer:
an image
Explanation:
good luck have a nice day
Answer:
Redundant paths can be available without causing logical Layer 2 loops.
Explanation:
- Spanning Tree Protocol is used to allow redundancy in the Layer 2 switched networks without creating cycles/circles also called loops.
- These loops are called physical loops.
- When two parts of the switched network are connected via two or more Layer 2 switches this result in a loop.
- This affects the performance of the network as the result of broadcast packets flooding.
- STP puts one port of the switch to forward mode and the rest of the ports within the same part of the network to the blocking mode to avoid broadcast packet flooding. STP puts all the ports that are allowing redundant paths to block mode and the one port that is left after this is placed in forward mode.
- Spanning Tree Algorithm is used by STP to determine the optimal path of switch to the network.
- Bridge Protocol Data Units are used to share the information about the optimal path determined by the spanning tree algorithm with other switches.
- This information helps STP to eliminate the redundant paths.
- So this is how STP tracks all the links in the switched network and eliminates redundant loops by allowing only one active path to the destination while blocking all other paths.
