mol CO₂ = 9.6
mol N₂ = 4.8
mol O₂ = 0.8
mol H₂O = 8
<h3>Further explanation</h3>
Reaction
4C₃H₅O₉N₃ → 12CO₂ + 6N₂ + O₂ + 10H₂O
mol CO₂
mol N₂
mol O₂
mol H₂O
<span>In order for an ionic compound to be created, there has to be a reaction between a metal and a non-metal. Having this in mind, the correct answer is A. strontium and chlorine. Strontium (Sr) is an alkaline earth metal, whereas chlorine (Cl) is a halogen gas, so a non-metal. There is no this type of a combination of metal + non-metal in other options, so only A is correct.</span>
The sulphate solutions came from a recycling LIBs waste cathode materials, which were done by previous research; their content is shown in Table 1 [18]. Sodium carbonate (Na2CO3) was purchased from Nihon Shiyaku Reagent, Tokyo, Japan (NaCO3, 99.8%), for the chemical precipitation. CO2 was purchased from Air Product and Chemical, Taipei, Taiwan (CO2 ≥ 99%), to carry out the hydrogenation–decomposition method. Dowex G26 was obtained from Sigma-Aldrich (St. Louis, MO, USA) and was used as a strong acidic cation exchange resin, to remove impurities. Multi-elements ICP standard solutions were acquired from AccuStandard, New Haven, Connecticut State, USA. The nitric acid (HNO3) and sulfuric acid (H2SO4) were acquired from Sigma-Aldrich (St. Louis, MO, USA) (HNO3 ≥ 65%) (H2SO4 ≥ 98%) The materials were analyzed by energy-dispersive X-ray spectroscopy (EDS; XFlash6110, Bruker, Billerica, MA, USA), X-ray diffraction (XRD; DX-2700, Dangdong City, Liaoning, China), scanning electron microscopy (SEM; S-3000N, Hitachi, Tokyo, Japan), and inductively coupled plasma optical emission spectrometry (ICP-OES; Varian, Vista-MPX, PerkinElmer, Waltham, MA, USA). In order to
Appl. Sci. 2018, 8, 2252 3 of 10
control the hydrogenation temperature and heating rate, a thermostatic bath (XMtd-204;
Steps:
Mw = w * R * T / p * V
T = 88 + 273 => 361 K
p = 975 mmHg in atm :
1 atm = 760 mmHg
975 mmg / 760 mmHg => 1.28 atm
Therefore:
= 0.827 * 0.0821 * 361 / 1.28 * 0.270
= 24.51 / 0.3456
molar mass = 70.92 g/mol
Answer:
II) Objects made of silver become tarnished.
Explanation:
Physical properties are the properties which can be observed without changing identity of substance.
Chemical properties are the properties which describe how the substance changes into the different substance completely.
Boiling is an example of physical change in state of the substance. Color is also an example of physical property like boiling point and hence these are constants. The reason of the color is that the chromium ions shows certain colors as the electrons are excited due to absorption of the light. The tarnishing of the silver is an example of the chemical change which occurs due to the reaction of the silver with oxygen. This is also known as corrosion.
