I am pretty sure that<span> the following which describes resistance force is the fourth option from the scale represented above : </span>D .force applied by the machine to overcome resistance. I choose this due to the Newton's 3rd law, as the<span> force that shoul be overcome by a machine before it perform its usual work. Do hope you will find it helpful! Regards!</span>
Answer:
When an electric field exists in a conductor a current will flow.
This implies a voltage difference between two points on the conductor.
Electrostatics pertains to static charge distributions.
That means that an object such as a charged spherical conductor will be at the same potential (voltage) on both its outer and inner surfaces.
P=F/A
A=F/P
P = 0.1 atm = 10132.5 Pa
A=4 x 10⁵/10132.5
A=39.477 m²
for one wing=39.477 : 2 = 19.739 m²
2 act in the opposite direction. To an objects motion, tending to slow it down
Answer:
Torque = 8.38Nm
Explanation:
Time= 8.00s
angular speed (w) =400 rpm
Moment of inertia (I)= 1.60kg.m2 about its rotation axis
We need to convert the angular speed from rpm to rad/ sec for consistency
2PI/60*n = 0.1047*409 = 41.8876 rad/sec
What constant torque is required to bring it up to an angular speed of 40rev/min in a time of 8s , starting from rest?
Then we need to use the formula below for our torque calculation
from basic equation T = J*dω/dt ...we get
Where : t= time in seconds
W= angular velocity
T = J*Δω/Δt = 1.60*41.8876/8.0 = 8.38 Nm
Therefore, constant torque that is required is 8.38 Nm