Turn the revolving turret (2) so that the lowest power objective lens (eg. 4x) is clicked into position.
Place the microscope slide on the stage (6) and fasten it with the stage clips.
Look at the objective lens (3) and the stage from the side and turn the focus knob (4) so the stage moves upward. Move it up as far as it will go without letting the objective touch the coverslip.
Look through the eyepiece (1) and move the focus knob until the image comes into focus.
Adjust the condenser (7) and light intensity for the greatest amount of light.
Move the microscope slide around until the sample is in the centre of the field of view (what you see).
Use the focus knob (4) to place the sample into focus and readjust the condenser (7) and light intensity for the clearest image (with low power objectives you might need to reduce the light intensity or shut the condenser).
When you have a clear image of your sample with the lowest power objective, you can change to the next objective lenses. You might need to readjust the sample into focus and/or readjust the condenser and light intensity. If you cannot focus on your specimen, repeat steps 3 through 5 with the higher power objective lens in place. Do not let the objective lens touch the slide!
When finished, lower the stage, click the low power lens into position and remove the slide.
Your microscope slide should be prepared with a coverslip over the sample to protect the objective lenses if they touch the slide.
Do not touch the glass part of the lenses with your fingers. Use only special lens paper to clean the lenses.
Always keep your microscope covered when not in use.
Always carry a microscope with both hands. Grasp the arm with one hand and place the other hand under the base for support.
It could possibly harm other plants and if those plants become less and are a good source for animals, the animals would most likely die
I think the scientist distinguish whether an entity is living or non living be describing the single unit of life, the live cell that could multiply, reproduce and generate trough time also through ages. I hope you are satisfied with my answer and feel free to ask for more
The diploid cells in this case include nerve cell, bone cell and muscle cell. A diploid cell is a cell that contains two sets of chromosomes, which is double the haploid chromosome number. They include all the somatic cells with exception of germ line cells. Gametes are haploid cells meaning they only have one set of chromosomes. During sexual reproduction, gametes (sperm and egg cells) fuse at fertilization to form a diploid zygote which develops into a diploid organism.
Answer:
Evaporation, Convection, Precipitation, and Collection are the main ones.
Explanation:
hope this helps
have a good day