<IMK=<GMH because they are vertical angles. Therefore:
84=4x
<em>*Divide both sides by 4*</em>
21=x
<IMK+<KMH=180 because they are supplementary angles. Therefore:
84+<KMH=180
<em>*Subtract 84 from both sides*</em>
<KMH=96
Hope this helps!!
Answer:
Dimension => 10 m × 9.6 m
Step-by-step explanation:
From the question given above, the following data were obtained:
Area (A) = 96 m²
Circumference (C) = 39.2 m
Dimension =.?
Next, we shall determine the Lenght and breadth of the rectangle. This can be obtained as follow:
Let L be the Lenght
Let B be the breadth
Area of a rectangle = L × B
96 = L × B ..... (1)
Circumference of rectangle = 2(L + B)
39.2 = 2(L + B) .... (2)
From equation 2, make L the subject
39.2 = 2(L + B)
Divide both side by 2
39.2 /2 = L + B
19.6 = L + B
Rearrange
L = 19.6 – B ....(3)
Substitute the value of L in equation 3 into equation 1
96 = L × B
L = 19.6 – B
96 = (19.6 – B ) × B
Clear bracket
96 = 19.6B – B²
Rearrange
B² – 19.6B + 96 = 0
Solving by factorisation
B² – 10B – 9.6B + 96 = 0
B(B – 10) – 9.6(B – 10) = 0
(B – 9.6)(B – 10) = 0
B – 9.6 = 0 or B – 10 = 0
B = 9.6 or B = 10
Substitute the value of B into equation 3:
L = 19.6 – B
B = 9.6
L = 19.6 – 9.6
L = 10
Or
L = 19.6 – B
B = 10
L = 19.6 – 10
L = 9.6
Since the length is always longer than the breadth,
Length (L) = 10 m
Breadth (B) = 9.6 m
Finally, we shall determine the dimension of the rectangle. This can be obtained as follow:
Length (L) = 10 m
Breadth (B) = 9.6 m
Dimension =?
Dimension = L × B
Dimension = 10 m × 9.6 m
Answer:
y = 2/3x + 1 1/3
Step-by-step explanation:
Find the slope using rise over run, (y2 - y1) / (x2 - x1)
Plug in the points:
(y2 - y1) / (x2 - x1)
(2 - 0) / (1 + 2)
2 / 3
= 2/3
Then, plug in the slope and a point into y = mx + b to solve for b:
y = mx + b
2 = 2/3(1) + b
2 = 2/3 + b
1 1/3 = b
Plug in the slope and y intercept into y = mx + b
y = 2/3x + 1 1/3 is the equation of the line
Answer:
Ok! When given points, to find the slope, you would use this equation: y2-y1/x2-x1. Let me demonstrate. In this set to find the slope with the coordinates (10,8) and (14,20), the y2 value is 20, and the y1 value is 8, and the x2 value is 14, and the y1 value is 10. So, your equation would look like this: (20-8)/(14-10), which simplifies to 12/4, or 3! So the slope is three, and that's how you do that when using an equation. OR, you could graph them, but that isn't too reliable so I do not recommend trying it, since you may not create the right slope.
Is that considered two equations?
