Answer: "CPU" .
________________________________
Answer:
Option (D) is the right answer.
Explanation:
DHCP term used as a short form of dynamic host configuration protocol, which is used to assigns the IP address automatically according to the network.
According to the scenario, the system is getting the wrong IP address that resulting in internet disconnection which is a failure of the DHCP server because it is responsible for assigning the right IP address to the system.
Hence option (D) is the most appropriate answer.
While other options are wrong because of the following reasons:
- Static IP is the type of IP address which is fix and doesn't change in the system after rebooting, hence it has no connection in the change of IP address.
- If the DHCP server is working well there is no chance of interference from the surrounding device.
- Network setting has no connection with computer power supply as SMPS is used to give power and boot system only.
Answer:
The correct option is Option B
Explanation:
We need to find examples of client-side code.
Client Side code: The part of code, that doesn't require server for performing specific task
SO, The correct option is Option B
Prompt for special characters in user name
Reason: We can use alert to generate prompt using JavaScript or through validation and it can be done on client side.
All other options, we need to hit the server to perform the task, So they are not client-side code.
Answer:
The definition of the issues is listed throughout the section down.
Explanation:
- Stranded cables are somewhat more compact and can be mounted quickly. Strong cables become rigid in design, and they are not versatile for installation. In comparison with solid connectors, amplification is indeed high.
- Unless the innermost layer including its wire is broken as we attempt to connect the cable, it will not function. So, whenever stripping the cables through the walls, it's indeed important not to rank the jack too profoundly.
- It would be quick to untwist the cable and then will ensure that perhaps the connection is appropriate for the most widely encountered rj-45 connection whenever the wiring of 0.5 inches becomes coupled up.
- If we don't keep the right pin colors in order, the relation won't work. Afterward, when another connexon is broken due to many complications, it would be impossible to figure out the contacts unless the pins coloring are not always in sequence.
- The connection pairs can be cut off through 0.5 inches within about therefore the gap within the connector is narrower and the wire would not be correctly attached if we break the cable further. The link is lost and the cable does not run properly.
- It is necessary to ensure that perhaps the wires are forced to the end of the platform since the connexon will indeed be broken as well as the connector would not operate unless the wires aren't moved. The wires will fall out of another socket as well.
- Before even being incorporated into another crimping unit, it is good to carefully check the connection sequence to ensure that perhaps the wires are to the end since it is impossible to verify the sequence until the wires are attached to something like the connector. Unless the connections are not always in alignment, the link will also not be provided and indeed the wire would not operate correctly, even if the link is provided. Such wires can also be presented to use load barriers, and that it's the simplest operation.
- The Durability Tester has been used to determine the hardness between two stages, whereas the connection efficiency is tested using the qualification tester.
