It would take 2 consultants 30 hours to create a slide deck of 120 slides.
Explanation:
Rate of slide making by one consultant- 2 slides per hour
Target- 120 slides
2 consultants are employed in the job-
Since 2 consultants are employed in the job, total rate of making slides per hour would be 4 slides/hour (2*2 slides/hour)
Time required to complete 120 slides= total slides/rate of doing slides per hour
Substituting the values, we get
Time required= 120/4= 30 hours
Hence, it would take 30 hours for 2 consultants to create a slide deck of 120 slides.
Answer:
Router
Explanation:
Routers have something called a WAN link, which can be used to connect 2 local area networks
Answer:
Network Address Translation (NAT)
Explanation:
With the aid of Network address translation(NAT), the IP addresses of a particular local network are translated or mapped into a single or multiple global or public IP addresses. Therefore, a wireless router could use NAT to translate its private IP address on internal traffic (network) to a routable address for the internet.
With NAT, businesses can use many internal IP addresses since they are just for internal purposes and will be eventually converted into a single or a few multiple routable IP addresses.
Three types of NAT are possible:
(i) Static NAT : There is a one - to - one mapping between private IP addresses and routable (public) IP addresses. One private IP is mapped to one public IP address.
(ii) Dynamic NAT : There is a many- to - many mapping between private IP addresses and routable (public) IP addresses. Multiple private IPs are mapped to many public IP addresses.
(iii) Port Address Translation (PAT) : Many - to - one relationship between the private IP addresses and public addresses. Many private IP addresses can be mapped or translated into a single public IP address. This type of NAT is also called NAT overload.
Answer:
I am doing it with python.
Explanation:
nums = '9 -8 -7 -6 -5 -4 -2 0 1 5 9 6 7 4'
myfile = open('data.txt', 'w')
myfile.write(nums)
myfile.close()
myfile = open('data.txt', 'r')
num1 = (myfile.read())
num1 = num1.split()
print(num1)
print(type(num1))
for x in num1:
x = int(x)
if x < 0:
minus = open('dataminus.txt', 'a')
minus.write(str(x) + ' ')
minus.close()
elif x>= 0:
plus = open('dataplus.txt', 'a')
plus.write(str(x)+' ')
plus.close()
