Answer:
Network Printer
Explanation:
A network printer is a type of printer that is accessible by network connections, making it available for use by other computers connected to that network. The network can either come from the printer or from a local computer provided to create network for the printer. Most of them contains a network interface card that allow them connect directly to a local network from which computers can then access them. This is different from a local printer that is directly connect to the computer via USB cable.
Network printer is very advantageous in that multiple network computers can access the printer at thesame time.
Answer:
Follows are the command which is used to copy file data:
CP data1 to data2 datafiles
Explanation:
In the above-given command code, we use the CP command, which is part of the Linux. In this command, we use CP that stands for copying data1 file to data2 file for copying, and for the files to be pasted. This command also uses the "datafiles", which is used to provide the relative final destination path.
Answer:
A) Map
Explanation:
All gasoline (petrol) fuel systems need ways or method that will be calculating amount of the air that is entering the engine.This is true as regards mechanical fuel injection, carburetors and electronic fuel injection.Speed density system fall under one of this method. "Speed" in this context means the speed of the engine while "density" means density of the air. The Speed is been measured using the distributor, crankshaft position sensor could be used here. The Density emerge from from measuring of the air pressure which is inside the induction system, using a typical "manifold absolute pressure" (MAP) sensor as well as air temperature sensor. Using pieces of information above, we can calculate
mass flow rate of air entering the engine as well as the correct amount of fuel can be supplied. With this system,
the mass of air can be calculated. One of the drawback if this system is that
Any modification will result to incorrect calculations. Speed-Density can be regarded as method use in estimation of airflow into an engine so that appropriate amount of fuel can be supplied as well as. adequate spark timing. The logic behind Speed-Density is to give prediction of the amount of air ingested by an engine accurately during the induction stroke. Then this information could now be used in calculating how much fuel is required to be provided, This information as well can be used in determining appropriate amount of ignition advance. It should be noted The speed density fuel injection system uses the Map sensor as the primary sensor to determine base pulse width
Answer:
Don’t know lol but look it up on g00gle and she will have the answr
Explanation:
