Answer:
The answer is:
30 minutes.
Step-by-step explanation:
We are given the following information:
at 160 m/min, tool life = 5 min.
at 120 m/min, tool life = 17 min.
This means that as the speed reduced from 160 m/min to 120 m/min, the tool life increased from 5 min. to 17 min, hence the difference between the changes are:
speed = 160 - 120 = 40 m/min
tool life = 17 - 5 = 12 min.
Therefore, it can be concluded that a change of speed of 40 m/min, increases the tool life by 12 min.
40 m/min = 12 min
∴ 1 m/min = 12/40 min.
∴ 100 m/min = 12/40 × 100 = 0.3 × 100 =30 min.
Here's what you need to know in order to answer this:
1 gallon = 128 fl oz
and
1 day = 24 hours.
Use those facts to invent fractions equal to ' 1 '.
Then use those to change the units of the "11 fl oz per hour".
You can multiply them ... since their value is ' 1 ', they won't
change the value of the "11 fl oz per hour", only the units.
(11 fl oz/hr) x (24 hr/da) x (1 gal / 128 fl oz)
= (11 x 24 x 1 / 128) (fl-oz - hr - gal) / (hr - da - fl-oz)
= 2.0625 gal/da
Answer:
what do u want me to do
Step-by-step explanation:
This is a classic example of a 45-45-90 triangle: it's a right triangle (one angle of 90) & two other sides of the same length, which means two angles of the same length (and 45 is the only number that will work). With a 45-45-90 triangle, the lengths of the legs are easy to determine:
45-45-90
1-1-sqrt2
Where the hypotenuse corresponds to sqrt2.
Now, your hypotenuse is 10.
To figure out what each leg is, divide 10/sqrt2 (because sqrt2/sqrt2 = 1, which is a leg length in the explanation above).
Problem: you can't divide by radicals. So, we'll have to rationalize the denominator:
(10•sqrt2)/(sqrt2•sqrt2)
This can be rewritten:
10sqrt2/sqrt(2•2)
=10sqrt2/sqrt4
=10sqrt2/2
=5sqrt2
Hope this helps!!
To get simplest form you make it the smallest fraction you can make it by dividing both sides by the same number until it's not possible anymore Hope that helped!