All categories

3 years ago

Awnser All for 100 points !!!!!

Engineering

1 answer:

lisabon 2012 [21]3 years ago

3 0

Explanation

What is the angle of the driveshaft.

Relative angles are IMPORTANT more important than absolute angles. You say that your trans is 1 degree off of horizontal and the rearend is 4 degrees off of horizontal. If the driveshaft is 2-3 degrees off of horizontal, then both U-joints are working at a 1-2 degree angle and they will cancel each other out, all is well. If you have one U-joint at zero and the other at three, or worse 1 the other way and 6 at the rear, your life will suck.

That reminds me, I really don't like to see U-joint angles of over 4 degrees under any circumstances. Which is why sometimes you need to point the pinion down instead of up, so the U joint angles are complementary even though the absolute angles are screwy.

The key is, you want both U-joints to be working at close to the same angle as each other.

You might be interested in

What is "Engineering"?

Liono4ka [1.6K]

Engineering is when both the application of science and math are used to solve problems. An engineer is a person who designs, builds, or maintains engines, machines, or public works. There are six large branches of engineering such as Mechanical, Chemical, Civil, Electrical, Management, and Geotechnical, they all have hundreds of subcategories of engineering under each different branch.

5 0

3 years ago

A steady, incompressible, two-dimensional velocity field is given by the following components in the x-y plane: u=1.85+2.05x+0.6

AnnZ [28]

Answer:

$\frac{du}{dt} = 1.515$

$\frac{dv}{dt} = 5.511$

Explanation:

The acceleration field is obtained by deriving the components in function of the time. That is to say:

$\frac{du}{dt}=2.05\cdot \frac{dx}{dt}+0.656\cdot \frac{dy}{dt}\\\frac{dv}{dt} = -2.18\cdot \frac{dx}{dt} -2.05\cdot \frac{dy}{dt}$

Where $\frac{dx}{dt} = u$ and $\frac{dy}{dt} = v$ .

The velocity components at given point are, respectively:

$u = 2.424$

$v=-5.266$

Lastly, the acceleration components are found:

$\frac{du}{dt} = 1.515$

$\frac{dv}{dt} = 5.511$

7 0

3 years ago

Carbon dioxide gas enters a well-insulated diffuser at 20 lbf/in.2 , 500R, with a velocity of 800 ft/s through a flow area of 1.

inessss [21]

Answer:

Exit Temperature= T2=563.6 °R

Exit Pressure= P2= 30.06 lbf/in^2

Mass Flow rate=1.276 lb/sec

Explanation:

Answer is explained in detailed way in the attached files.

4 0

3 years ago

A ____________ is a term that originally was referring to a way to reproduce a technical drawing documenting an architectural or

larisa86 [58]

Answer:

The answer is blueprint.

Explanation:

Have a nice day or night!

7 0

2 years ago

True or false: You can create a network with two computers. Answer True

coldgirl [10]

To create a computer network, you must have at least two computers. ... A protocol is a standard set of rules and procedures for the control of communications in a network. TRUE. Two computers using TCP/IP can communicate even if they are based on different hardware and software platforms. So your right :)

Hope this helps :)

7 0

3 years ago

Read 2 more answers