<h2>Answer:</h2>
18.4 percent, 18.4%
<h2>
Explanation:</h2>
According to a report published by US officials the The predominance of obesity is 13.9 percent between 2- to 5-year-olds, 18.4 percent among 6- to 11-year-olds, and 20.6 percent amidst 12- to 19-year-olds.
<h2>
</h2>
A result of convergent evolution are the webbed feet of ducks and frogs.
Explanation:
The evolution of the animals, or rather the development of adaptive features, works in very interesting manner. It is very common in nature that animals that are closely related do not share similar characteristics, or the opposite, animals that are not closely related but share similar characteristics. The later case, is referred to as convergent evolution, where totally different animals have developed the same or very similar characteristics in order to be better suited for their environment.
In this case we have the ducks and frogs, and the webbed feet as shared adaptations, or feature. The ducks are birds, while the frogs are amphibians, and their last common ancestor has lived hundreds of millions of years ago. Despite that, both animals have developed webbed feet, and the reason for this has been that both animals have faced the same challenge, swimming and diving, and the webbed feet help them to be much faster and more agile in the water.
Other examples of convergent evolution (in the present and in the past) are:
- Hyena - Tasmanian devil
- Sandy cat - Fenec fox
- Smilodon - Thylacosmilus
- Bats - Birds
Learn more about the categories of adaptations brainly.com/question/2396978
#learnwithBrainly
The constant turnover of body tissues requires the <u>chemical energy </u>supplied by carbohydrates, proteins, and lipids.
<h3> What is Chemical energy?</h3>
- The bonds of chemical molecules contain energy.
- Exothermic reactions are those in which chemical energy is released during the reaction, frequently in the form of heat.
- Some of the heat energy needed for a reaction to continue can be stored as chemical energy in newly created bonds.
- The body transforms the chemical energy in food into heat and mechanical energy.
- At a power plant, coal's chemical energy is transformed into electrical energy. Through the process of electrolysis, the chemical energy in a battery can also generate electricity.
Learn more about chemical energy here:
brainly.com/app/ask?q=CHEMICAL+ENERGY%2BVERIFIED+ANSWERS
#SPJ4
Sound quality can be divided into amplitude, timbre and pitch. If there’s an impedance mismatch between your two devices connected to the single output, you could have a large mismatch between the levels arriving at each device. If the difference is large enough, one device may have distorted or inaudible audio.
To avoid this, you should ensure that both devices connected to the split signal are similar - such as 2 pairs of headphones, 2 recorder inputs, and so on. When you place 2 devices with wildly differing load impedances on a splitter is when you’ll encounter problems - such as headphones on one split and a guitar amp input on the other.
To get around this, you can use either a distribution amplifier (D.A.) or a transformer balanced/isolated splitter - which will work over a larger range of load impedances, typically. Depends on the quality of the splitter and the exact signal path. If you’re using the splitter to hook two things into one input, and you’re using quality connectors, you probably won’t lose much quality. There can be an increase in impedance of the cable due to the imperfect continuity of the physical connection, however with unbalanced line-level signals, impedance at both ends of the chain tends to be orders of magnitude higher than the connection will create, so one split will be barely noticeable. So too, the noise increase from the additional length of cable.
Now, one source into two inputs, that will by basic math and physics result in a 3dB drop in signal strength, which will reduce SNR by about that much. By splitting the signal path between two inputs of equal impedance, half of the wattage is being consumed by one input and half by the other (the equation changes if the inputs have significantly different impedances). So each input gets half the wattage produced by the source to drive the signal on the input cable, and in decibel terms a halving of power is a 3dB reduction. Significant, until you just turn the gain back up. The “noise floor” will be raised by however much noise is inherent in the signal path between the split and the output of the gain stage; for pro audio this is usually infinitesimal, but consumer audio can have some really noisy electronics, both for lower cost and because you’re not expected to be “re-amping” signals several times between the source and output.
Repetition Practice interferes with the ability to learn new information is true.
It is impossible to overstate the value of repetition. In fact, it needs to be emphasized again how important repetition is as a learning tool. It enables the transfer of a conscious skill into the subconscious, freeing up working memory and enabling the acquisition of new skills. Repetition gives kids the practice they need to acquire new skills, so it's a good thing. Repetition helps kids learn faster, builds confidence, and fortifies the neural connections in their brains that support learning. Practice doesn't always make perfect while learning a new skill. Zachariah Reagh and Michael Yassa, neurobiologists at UC Irvine, discovered that while repetition improves the factual content of memories, it can decrease the amount of detail associated with such memories.
Learn more about repetition here-
brainly.com/question/28084537
#SPJ9
