Answer:
I will assume that the end of the top section if it were cut at 0 degrees would be cut at right angles to the length of the section.
Joining a top section with a 37 degree end angle to a side piece with a 50 degree end angle will result in the length of the side piece being at an angle of
37 + 50 = 87 degrees to each other.
The same will be true for the other side.
If the sides were parallel, then going up one side, across the top and then down the other side will result in a change of direction of 180 degrees. However, in this frame the direction turns 87 degrees at the first top corner and another 87 degrees at the second top corner. This is a total of
87 + 87 = 174 degrees instead of 180 degrees.
The two sides diverge at an angle of
180 - 174 = 6 degrees from each other as they extend downwards from the top of the frame
Step-by-step explanation:
Answer:
M= -3
Step-by-step explanation:
The two points on the graph are (0,4) and(1,1), using the slope formula you get a slope of - 3
Answer:
0.5152
Step-by-step explanation:
Answer:
D
Step-by-step explanation:
3x and 30 are vertically opposite angles and congruent, then
3x = 30 ( divide both sides by 3 )
x = 10 , thus
3x = 3 × 10 = 30°
x = 10 ; angle measure is 30° → D
Answer:
Step-by-step explanation:
If A is parallel to B, then angles 2 and 4 are same side interior and they are supplementary. Thus,
2x + 10 + 4x + 80 = 180 and
6x = 90 so
x = 15
