Answer:
<em>The </em><em>answer </em><em>is </em><em>(</em><em>A)</em>
Explanation:
Double-click both the worksheet tabs one at a time and then enter the new names.
Answer:
Network.
Explanation:
The Transmission Control Protocol/Internet Protocol (TCP/IP) model is a standard networking protocol which allows network devices such as routers, switches, and host computers to interconnect and communicate with one another over a network. The Transmission Control Protocol/Internet Protocol (TCP/IP) model comprises of four (4) layers and these includes;
I. Application layer.
II. Transport layer.
III. Internet layer.
IV. Network layer.
The network layer in the Transmission Control Protocol/Internet Protocol (TCP/IP) model is responsible for delivering data between two nodes.
Basically, this layer known as network layer is the fourth layer of the Transmission Control Protocol/Internet Protocol (TCP/IP) model and it is typically responsible for the transmission of packets from one network device to another.
Answer:
RJ-11 connector.
Explanation:
RJ-11 (Registered Jack-11) also known as the phone line or modem port is a network cable having twisted wire pairs and a modular jack with two, four or six contacts. It is generally used with telephones and modem.
Hence, the other connector type that can be used with CAT 3 installations is the RJ-11 connector.
<u>Answer:</u>
The correct answer option is D. set the switch to the highest range and then move it to a range that gives the most accurate reading.
<u>Explanation:</u>
When measuring an unknown voltage with an analog VOM, one should set the meter to the highest range and then move it to a range that gives the most accurate reading.
The reason being that the analog meters indicate the measurement of voltage by moving a needle across a physical card by printing numbers on it.
So in case the voltage is nearly 100 times the full range to which the meter is set, then its needle will try move to a position which will be 100 times the highest number on the meter.
