The read-write type of memory helps in reading as well as writing data. This computer memory is used by users to continually update the data (to access (read from) or alter (write to) ) that is held on hardware storage devices. Internal or external hard disk drives, rewritable CDs or small flash drives can be all physical setups of read-write memory.
Answer:
It is not possible.
Explanation:
In this example, we need to accommodate 473 computers for six clients that are 473 IP addresses.
For this request just we have /22 IPv4 address blocks, this mean
22 red bits 11111111111111111111110000000000 <--- 10 host bits
We must increase red bits to 25, we need these 3 bits to create 6 sub red, in this case, 2^3 = 8 sub red.
Why did we ask 3 bits? Because if we ask only 2, 2^2 = 4, and we need 6 sub red.
25 red bits 11111111111111111111111110000000 7 host bits
In this case, we need more than 260 computers, but just we have 7 bits, this means.
2^7 = 128 and just one customer needs 260, for that is impossible.
Answer:
pong i could be wrong i think its right tho
Explanation:
Solution:
three reasons you might use hwinfo when troubleshooting and upgrading a computer are as follows:
1) If we want to identify a hardware component with out opening the case.
2. if we want identify Features of a motherboard, video card, or processor.
3. establish benchmarks for the components in
It usually takes about 45 minutes.
