Answer: Increase the depth of ventilation.
In high altitude, the oxygen pressure will be much lower that makes the gas exchange rate is lower and decrease the oxygen delivery to <span>the tissue.</span> To counter this, the mouse will increase its depth of ventilation so there is more air inside the lungs for every inspiration.
PART 1
1. The answer is low frequency electromagnetic waves are able to go around obstacles due to their larger wavelengths. This characteristic of lower frequency waves is due to their ability to diffract around obstacles such as buildings and hills. Therefore, they transmit over long distances unlike high frequency electromagnetic waves.
2. One disadvantage is interference. Electromagnetic waves of the same frequency transmitted at the same time will interfere with one other and therefore the signal will be lost or scrambled. Other electromagnetic waves such as microwaves are affected (interfered with) by weather elements.
3. Analogue signals are continuous signals with wave-like properties while digital signals are discrete signals or pulse (ons (1s) and offs (0s) that represent bits). Analogue signal is represented by a sine-wave while digital signal is represented by discrete squares waves.
4. Digital signals are less immune to eavesdropping unlike analogue signals. Analogue signal is also more prone to distortion unlike digital signal. Digital signals transmit more data than analogue signals. Digital signal draw less energy to transmit compared to analogue signal.
5. Broadcasting of TV is nowadays using digital signals due to the high number of available channels. Computers and the interne utilize digital signaling to transmit data. Controls systems such as radar system also use aspects of analogue waves. Sensors also utilize analogue waves especially transducers such as seismology equipment.
PART 2
1. One way is by sending radio waves to probes sent out in space to give them commands during exploration. Radio telescopes also pick up naturally-occurring radio waves from space and analyze the data to make conclusions about space and the astronomical objects.
2. Radio waves are used in communication by transmitting data over long distances. One example is its use TV transmission. Another is through military defense of airspace. The radio waves are used to detect enemy intrusion into restricted airspaces using radar.
3. It is common that signal from the environment will be in analogue signal format. The conversion to digital signals allows for the digital equipment in the telescope to interpret and analyze the data. Telescopes prefer digital equipment because they consume less power, handle more data, and are less prone to intrusion, and distortion, hence more secure to analogue equipment.
Sound quality can be divided into amplitude, timbre and pitch. If there’s an impedance mismatch between your two devices connected to the single output, you could have a large mismatch between the levels arriving at each device. If the difference is large enough, one device may have distorted or inaudible audio.
To avoid this, you should ensure that both devices connected to the split signal are similar - such as 2 pairs of headphones, 2 recorder inputs, and so on. When you place 2 devices with wildly differing load impedances on a splitter is when you’ll encounter problems - such as headphones on one split and a guitar amp input on the other.
To get around this, you can use either a distribution amplifier (D.A.) or a transformer balanced/isolated splitter - which will work over a larger range of load impedances, typically. Depends on the quality of the splitter and the exact signal path. If you’re using the splitter to hook two things into one input, and you’re using quality connectors, you probably won’t lose much quality. There can be an increase in impedance of the cable due to the imperfect continuity of the physical connection, however with unbalanced line-level signals, impedance at both ends of the chain tends to be orders of magnitude higher than the connection will create, so one split will be barely noticeable. So too, the noise increase from the additional length of cable.
Now, one source into two inputs, that will by basic math and physics result in a 3dB drop in signal strength, which will reduce SNR by about that much. By splitting the signal path between two inputs of equal impedance, half of the wattage is being consumed by one input and half by the other (the equation changes if the inputs have significantly different impedances). So each input gets half the wattage produced by the source to drive the signal on the input cable, and in decibel terms a halving of power is a 3dB reduction. Significant, until you just turn the gain back up. The “noise floor” will be raised by however much noise is inherent in the signal path between the split and the output of the gain stage; for pro audio this is usually infinitesimal, but consumer audio can have some really noisy electronics, both for lower cost and because you’re not expected to be “re-amping” signals several times between the source and output.
Answer: DNA contains alternating sugar-phosphate molecules whereas RNA does not contain sugars
Explanation:
The enzyme will be transported to either the cytoplasm or the mitochondria to perform the functions.
<h3><u>Explanation:</u></h3>
Cellular respiration is the process by which a living cell burns nutrients like glucose, fats, or even proteins to produce energy molecules namely ATP to perform its daily works. This cellular respiration, which is mainly aerobic, takes place both in cytoplasm and mitochondria.
The glycolysis part of the cellular respiration takes place in the cytoplasm. The enzymes that take part in the glycolysis cycle reaches to cytoplasm from ribosome to perform.
But both the Kreb's Cycle and the Electron Transport chain take place in mitochondria. Kreb's Cycle takes place in mitochondria matrix and ETC takes place in inner mitochondrial membrane. Although ETC isn't a enzymatic process, Kreb's Cycle is fully enzymatic and the enzymes reaches from ribosomes inside mitochondria by transporters.
