All categories

3 years ago

Which cannot be chemically broken down into simplier

Chemistry

1 answer:

stealth61 [152]3 years ago

6 0

Answer:

Explanation:

Because elements cannot be further broken down by chemicals.

You might be interested in

What is the molar mass of chlorine?

aalyn [17]

Molar mass Chlorine ( Cl ) = 35.45 g/mol

hope this helps!

4 0

3 years ago

Pure chlorobenzene is contained in a flask attached to an open-end mercury manometer. When the flask contents are at 58.3°C, the

Elan Coil [88]

Answer:

The slope is 4661.4K

(B), the intercept is 18.156

The vapor pressure of chlorobenzene is 731.4mmHg

The percentage of chlorobenzene originally in the vapor that condenses is = 99.7%

Explanation:

Two sets of conditions (a and b) are observed for L1 and L2 at two different temperatures.

$T_{a}$ = 58.3°C

$L1_{a}$ = 747mmHg

$L2_{a}$ = 52mmHg

$T_{b}$ = 110°C

$L1_{a}$ = 577mmHg

$L2_{b}$ = 222mmHg

We need to convert the temperatures from Celsius to Kelvin (K)

$T_{a}$ = 58.3°C + 273.2

$T_{a}$ = 331.5k

$T_{b}$ = 110°C + 273.2

$T_{b}$ = 383.2k

We then calculate the vapor pressures of the chlorobenzene at each set of conditions by measuring the difference in the mercury levels.

$P^{0}$ = $P_{atm} - (P_1 -P_2)$

The vapor pressure under the first set of conditions is:

$P^{a}$ = 755mmHg - (747mmHg - 52mmHg)

$P^{a}$ = 60mmHg

The vapor pressure under the second set of conditions is:

$P^{b}$ = 755mmHg - (577mmHg = 222mmHg)

$P^{b}$ = 400mmHg

First question say we should find ΔH(slope) and B(intercept) in the Clausius- Clapeyron equation:

Using the Formula :

$In_p^{0} = \frac{- (delta) H}{RT} + B$

where (delta) H = ΔH

The slope of the $In_p^{0} = \frac{T_1T_2 In (P_2/P_1)}{T_1-T_2}$

Calculating the slope; we have:

$\frac{- (delta) H}{R} = \frac{T_1T_2 In (P_2/P_1)}{T_1-T_2}$

$\frac{- (delta) H}{R}$ = $\frac{331.5 * 383.2 * In (400/60)}{(331.5-383.2)}$

$\frac{- (delta) H}{R}$ = -4661.4k

$\frac{ (delta) H}{R}$ = 4661.4k

The intercept can be derived from the Clausius-Clayperon Equation by making B the subject of the formula. To calculate the intercept using the first set of condition above; we have:

B = $In_p_{1} + \frac{ (delta) H}{RT}$

B = $In 60 + \frac{4661.4}{331.5}$

B = 18.156

Thus the Clausius-Clayperon equation for chlorobenzene can be expressed as:

In P = $\frac{-4661.4k}{T} + 18.156$

In question (b), the air saturated with chlorobenzeneis 130°C, converting he temperature of 130°C to absolute units of kelvin(k) we have;

T = 130°C + 273.2

T = 403.2k

Calculating the vapor pressure using Clausius-Clapyeron equation: we have;

$In_p_{0}$ = $In_p_{0} = \frac{-4661.4}{403.2} + 18.156$

$In_p_{0}$ = 6.595

$p_{0}$ = $e^{6.595}$

$p_{0}$ = 731.mmHg

The vapor pressure of chlorobenzene is 731.4mmHg

The diagram of the flowchart with the seperate vapor and liquid stream can be found in the attached document below.

Afterwards, both the inlet and outlet conditions contain saturated liquid.

From the flowchart, the vapor pressure of chlorobenzene at the inlet and outlet temperatures are known:

$P_1(130^{0}C)$ = 731.44mmHg

$P_1(58.3^{0}C)$ = 60mmHg

To calculate the percentage of the chlorobenzene originally in the vapor pressure that condenses; we must first calculate the mole fractions of chlorobenzene for the vapor inlet and outlet using Raoult's Law:

$y_1 = \frac{P^0 (T)}{P}$