Answer:
ok it is there is no question lol
Step-by-step explanation:
Solution :
Faulty electrical connects = P(A) = 0.80
Mechanical defects = P(B) = 0.92
Mechanical defects are related to loose keys = P(C/B) = 0.27
Improper assembly = P(D/B) = 0.73
Defective wires = P(E/A) = 0.35
Improper connections = P(F/A) = 0.13
Poorly welded wires = P(G/A) = 0.52
Now, the probability due to loose keys = 0.27 x 0.92 = 0.2484
Improperly connected = 0.13 x 0.80 = 0.1040
Poorly welded wires = 0.52 x 0.80 = 0.4160
So, the probability that a failure is due to improperly connected or poorly welded wires = 0.1040 + 0.4160
= 0.5200
Answer:
10x
Step-by-step explanation:
Answer:
(For the first two questions I do believe that you will need a protractor to calculate the angles.)
15) 
measures out to -70° in order to display that the angle would be in quadrant IV (the bottom right quadrant.)
The first image attached shows where the angle should be located.
16) 
is equal to 60° (the line you draw will be in quadrant 1 (the top right quadrant))
17) 350° is 
or 6.11 (the answer depends on the format the professor wants.)
18) 240° is 
radians or -4.19 (I am rounding to the nearest hundredths place the unsimplified answer is −4.18879020...)
Answer: 5
This is because (4r + 6) means you take r and multiply that number by 4.
Because there is no number, r would equal one in this case.
4 • 1 is 4
4 + 6 is 10
This would give us 1/2(10)
Half of 10 is 5.
Therefore, the answer is 5.
