Answer:
It is a solution of the ordered pair.
Step-by-step explanation:
The y intercept is (0,-2)
Answer:
G) Yes, because the plots and the linear model both align to produce a similar calculated sum.
H) I need to see the data table again for step 2d.
Step-by-step explanation:
1.) You scatter plot should be off by 6.97, since that was the first difference in your data table set of terms.
Basically subtract all of the GPAs from the Hours in the table.
Ex). Hours - GPA = Difference
or like before,
9.2 - 2.23 = 6.97
Do the rest of the numbers like this then plot the answers. I'd advise you plot your second set of scatter plot points in a different color.
Two equations will be called independent if their graphs touch only on one point (they have one solution for the x-value and one solution for the y-value), and two equations will be dependent if they touch at every point (there is an infinite number of solutions).
This definition of independent and dependent equations is shown in the following diagram. Consider that there are two lines, one red line and one blue line:
They are independent if they touch only on one point and dependent if they touch at every point (they are the same line).
In our case, we are asked to write an equation in order to create an independent consistent linear system.
Note: Consistent means that the system has a solution.
First, we graph the given equation:
There are many different equations that will form an independent consistent linear system with this equation.
We are going to choose the following line equation:
Because when we graph this equation next to the previous line:
We can see that they touch at one point, thus there is a solution and the system is independent --> we have created an independent consistent linear system.
Answer:
Answer:
I believe it is 9ft
Step-by-step explanation:
Answer: Seventh power of 10
Step-by-step explanation:
X > 1 so exponent will be positive and decimal point moves left. At each point divide X by 10, add 1 to exponent of 10. Exponent starts at zero.
Each time you move the decimal point one to left, you have divided the number by 10, so you have to compensate by multiplying the 10^n factor by 10, say 10 × 10^3 = 10×10×10×10 = 10^4.
12345678 = 12345678 × 10^0
= 1234567.8 × 10^1
= 123456.78 × 10^2
= 12345.678 × 10^3
= 1234.5678 × 10^4
= 123.45678 × 10^5
= 12.345678 × 10^6
= 1.2345678 × 10^7
Each time you move decimal to right, you have multiplied the number by 10, so you have to compensate by dividing the 10^n by 10, subtracting one from exponent.
0.000123 × 10^0 = 0.00123 × 10^-1
= 0.0123 × 10^-2 = 0.123 × 10^-3 = 1.23 × 10^-4
10^-2 / 10 = (1/(10×10)) / 10 = 1/(10×10×10) = 10^-3
