Answer:
x = 18
Step-by-step explanation:

8x = 12 * 12
8x = 144

x = 18
Answer:
If we assume a temperature of 20ºc and the blood interfacial surface tension is similar to water interfacial surface tension, the diameter of the capillary tube should be 0.933mm.
Step-by-step explanation:
The Jurin law describes the height a fluid can reach in a capillary tube. This law can be written as:

where γ is the interfacial surface tension, θ is the contact angle with the fluid, ρ is the fluid density, g is the gravity acceleration and r is the tube radius.
If we assume that the interfacial surface tension of blood and water are almost the same, γ=0,0728 N/m at 20ºc. Therefore the diameter of the tube will be:

If it’s from lowest to highest it goes from
-4, 3,6
And highest to lowest like
6,3,-4
☀︎
I'm assuming the square root is over the entire fraction (and not just over the 1). If so, then the answer is 1/14
Apply the square root to each part:
sqrt(1) = sqrt(1^2) = 1
sqrt(196) = sqrt(14^2) = 14
The general rule is sqrt(x^2) = x where x is any positive number.
Note how
(1/14)*(1/14) = (1*1)/(14*14) = 1/196
showing that 1/14 multiplied with itself is 1/196. The square root just thinks of this process in reverse. You start with 1/196 and end up with 1/14.
I think it would be -2880