Answer:
Digital Art or Animator for moving picture art.
Explanation:
Answer:
A
Explanation:
The internet protocols are changed every year to adapt to the new devices that have been connected to the network. Back in the 1990s, most traffic used a few protocols. Pv4 routed packets, TCP turned those packets into connections, SSL (later TLS) encrypted those connections, DNS named hosts to connect to, and HTTP was often the application protocol using it all.
For many years, there were negligible changes to these core Internet protocols; HTTP added a few new headers and methods, TLS slowly went through minor revisions, TCP adapted congestion control, and DNS introduced features like DNSSEC. The protocols themselves looked about the same ‘on the wire’ for a very long time (excepting IPv6, which already gets its fair amount of attention in the network operator community.)
As a result, network operators, vendors, and policymakers that want to understand (and sometimes, control) the Internet have adopted a number of practices based upon these protocols’ wire ‘footprint’ — whether intended to debug issues, improve quality of service, or impose policy.
Now, significant changes to the core Internet protocols are underway. While they are intended to be compatible with the Internet at large (since they won’t get adoption otherwise), they might be disruptive to those who have taken liberties with undocumented aspects of protocols or made an assumption that things won’t change.
Answer:
6 hosts can have IP addresses on the LAN attached to the router interface
Explanation:
Given IP address
=> 192.168.192.10/29
It has a subnet mask of /29 which means it has 3 host bits. This is calculated by subtracting 29 from 32(number of bits in an IPV4)
Since there are 3 host bits, the total number of possible addresses is given by
=> 
= 8 possible addresses.
Out of these 8 possible addresses, the first address will be the subnet id and the last address will be the broadcast address.
Therefore, there are only 6 addresses available for the hosts.
<em>Hope this helps!</em>
Answer:
Find and replace header and footer
