Let t=time to reach the ground=8 secs, g= acceleration of gravity. The speed v on reaching the ground is gt=8g=78.4 m/s where g=9.8 m/s/s approx.
Answer:
Therefore, we need an invert, and a rectifier, along with the transformer to do the job.
Explanation:
A transformer, alone, can not be used to convert a DC voltage to another DC voltage. If we apply a DC voltage to the primary coil of the transformer, it will act as short circuit due to low resistance. It will cause overflow of current through winding, resulting in overheating pf the transformer.
Hence, the transformer only take AC voltage as an input, and converts it to another AC voltage. So, the output voltage of a transformer is also AC voltage.
So, in order to convert a 6 V DC to 1.5 V DC we need an inverter to convert 6 V DC to AC, then a step down transformer to convert it to 1.5 V AC, and finally a rectifier to convert 1.5 V AC to 1.5 V DC.
<u>Therefore, we need an invert, and a rectifier, along with the transformer to do the job.</u>
Answer:
D
Explanation:
P=Work/Time
The rate at which work is done matches that.
Answer:
The correct answer is D.
Non-sampling error is the error that results from under-coverage, non-response bias, response bias, or data-entry errors. Sampling error is the error that results because a sample is being used to estimate information about a population.
Explanation:
Sampling error is related to the variation between the true values of the sample and the population. If occurred, it is always random depending upon the sample chosen.
Non-sampling error can be random as well as non-random. Non-sampling error can occur irrespective of the sample chosen. It is related to the inappropriate analysis of the data.
Answer:
Given a tube of diameter d, = 3cm = 0.03m
Pressure Balance
Mercury pressure at the tube bottom Pₓ = Pa + ρgh
where
Pa = Atmospheric pressure = 101kpa
ρ = Density of mercury = 13,546kg/m3
g = acceleration due to gravity
h = height of the tube?
Given
Bottom pressure in excess of the atmospheric pressure = 48kPa = Pₓ - Pa
Therefore, 48kPa = ρgh
h = 48(kN/m2)/ρg
h = 48,000kgms⁻²m⁻²/(13546kgm⁻³ x 9.81ms⁻²)
h = 0.36m
the tube is 36cm tall
